In recent years, China's automobile industry has developed rapidly. In particular, in the past 2009, the annual sales of the auto market exceeded the 13 million mark, officially surpassing the United States and becoming the world's largest auto market. Accompanying this is the vigorous development of the auto parts industry. In order to compete for the market share in China, major auto manufacturers have strengthened their cost control capabilities in the Chinese market, and parts and components support systems will be gradually liberalized. Parts procurement will slowly tilt toward China. With the rising of auto parts industry, the chances of auto manufacturers experiencing problems in parts procurement and inspection should be reduced.
In the research and development stage, the various functions and parameters of the car have been basically determined, but the greatest impact on the quality of the car than the drawings into a manufacturing process. The so-called accumulation of soil will affect the whole, and the quality of each component will directly affect the performance of the vehicle. Therefore, the procurement and inspection of parts become an extremely important part of the automobile manufacturing process.
Purchasing parts and components to the direction of specialization and specialization
The structural characteristics of China's auto parts industry is mainly due to the scattered and backward manufacturers. The entire vehicle manufacturer tends to purchase on-site or purchase from the company's internal companies, and implements multiple procurement methods for the same parts of the same model to promote competition among parts manufacturers. In this way, because the production scale of each component factory is too small, it will not be sufficient to realize economies of scale, thus increasing costs, and too small a production scale will result in the inability to invest sufficient funds for R&D. The entire vehicle manufacturer has implemented multiple orders, so that the parts factory can not expect to obtain stable orders, it can not be fully invested, and thus it is difficult to improve product quality.
Fortunately, due to the huge increase in the status of the Chinese market in the global automobile market, many foreign automakers have begun to consider the gradual release of the parts and components supporting system, and cooperate with local Chinese parts manufacturers to establish long-term strategic partnerships. relationship. In terms of specific operations, it is possible to start with the control of parts and components companies, select parts of well-known brands that are widely recognized by customers, and dynamically adjust the list of parts procurement companies each year to win the fittest according to the use situation of the previous year; , Establish quality files of parts and components, carry out routine analysis on a monthly basis, and supervise and promptly rectify the defective parts and components companies.
In addition, compared with European and American automakers and Japanese automakers whose domestic auto companies are relatively mature, local auto makers have high procurement costs and complicated procurement procedures. In order to pass on cost pressures, it is likely that they will be able to suppress supplier costs. This will inevitably lead to The supplier of parts and components will accordingly achieve the goal of reducing costs by reducing product quality within a certain range. Therefore, continuing to develop the procurement process and system in a professional and scientific direction is one of the important ways to ensure the quality of parts and components.
Inspection of parts and components to scientific and institutionalized development
With reliable parts supply, the next inspection process is also indispensable. Quality inspection is the most important thing to ensure the reliability of the product. Components from the supplier to the assembly shop are only checked in layers in the middle to ensure that the quality of the vehicle is not affected. Only from the operator level to control the occurrence of defects can ensure the reliability of the final product.
For the inspection of parts and components, a scientific sampling inspection system should be established to eliminate the hidden dangers of quality. Specific operations can be spotted according to small parts, and 100% inspection is required before large parts are put into storage. Establish records for parts and components of various specifications, trace back the raw materials for each part, and provide records for specifications, models, and other indicators. If a parts and components company needs to replace raw materials halfway, it should be re-inspected, examined, and registered.
Different incentives and penalties are applied to different suppliers to promote suppliers' efforts to increase product quality control. In accordance with certain standards, all parts and details are standardized, and standardization is the process of formulating, implementing, and constantly improving standards, which is the process of continuously improving quality and improving management.
Description:
The PA type mini Electric Hoist with single phase motors can be used in factories, mines, agriculture , electric
power, construction building site, dock, and warehouse for installation of the
machines, lifting the cargoes, load and unloading the trucks.
Features:
1.Capacity: ranges from 200kg-1200kg
2.Small, convenient hoist for lifting often used for home, mall, construction, warehouse, workshop, harbors, airport and so on
3.100% pure copper motor, good cooling and durable
4.With emergency knob for the handle
5.With upper limit and lower limit
6.Anti-rotary wire rope
7.Longer stator and rotor
8.Thick shell to protect the mini hoist
9.CE certificate available
Specifications:
Model
Method of Use
Rated Volt (V)
Rated Capacity
(KG)
Lifting Speed
Lifting Height (m)
Qty/CTN PCS
Packing Size(mm)
G.W/N.W (KG)
PA200M
Single-Hook
AC 220/230V 50/60Hz
100
10
12
2
38*32*25
22.5/22
Double-Hook
200
5
6
PA250M
Single-Hook
125
10
12
23/22
Double-Hook
250
5
6
PA300M
Single-Hook
150
10
12
23.5/23
Double-Hook
300
5
6
PA400M
Single-Hook
200
10
12
45*34*27
33/32
Double-Hook
400
5
6
PA500M
Single-Hook
250
10
12
33.5/32.5
Double-Hook
500
5
6
PA600M
Single-Hook
300
10
12
35/34
Double-Hook
600
5
6
PA800M
Single-Hook
400
8
12
38/37
Double-Hook
800
4
6
PA1000M
Single-Hook
500
8
12
1
54*25*32
32/31
(m)
Products show:
About us :
We can provide:
Quality guarantees with test reports on request
Short sample and production lead times
Professional services
Our products feature colorfastness and anti-UV and AZO free functions.
OEM and ODM designs are welcomed.
We sincerely hope that we can cooperate with you in the near future!
We are the manufacture for the chain block, lever block, electric chain
hoist, Electric Wire Rope Hoist, mini electric hoist, pallet trucks,
the Load Chain, and the hand chain. Look
forward to hearing from you.
Thank you very much.
Our Services
1.Client
We treasure and try to understand all the different needs of our clients and seek to forge a long term professional relationship with them. The satisfaction of each and every customer is our main goal and motivation in conducting our business.
2. People
We work as a team and treat each other with respect. Our solid, capable and knowledgeable team is valued as the greatest asset and an integral part of the business.
3. Product
Our products are of HIGH quality standards and always come with certificate of compliance by the manufacturers.
4. Performance
We aim to achieve high level of performance and satisfaction to both our client and people, which include delivering high quality services and treating people with integrity.
5. Free sample and OEM service
We can provide free samples to you and we also have OEM service, we can put your logo on the label and the information you need on the webbing too.
PA Mini Wire Rope Hoist,PA Electric Wire Hoist,Mini Wire Rope Hoist,Single Phase Motor
Hebei Liston Lifting Rigging Manufacturing Co., Ltd. , http://www.liftingriggingfactory.com