Ship Lifting and Launching Inflatable Marine Airbag

Marine airbag technology for upgrading and launching is a technical method that a ship finishes upgrading and launching through an airbag. The ship launches by the technology as follows: To inflate hoisting airbag and properly move the ship under the traction of winch and wire rope to finish launching. When the ship goes up, rolling airbag should be used firstly, and after positioning, the airbag is hoisted to cushion. The fundamental principle of ship launching and upgrading is to inflate the airbag under low pressure and bear in large area.

Standard specifications of xincheng Ship Launching Airbags
Diameter (D): From 0.8m to 2.0m.
Effective Length (EL): From 6m to 18m.
Total Length (TL): From 7m to 19.5m
The above specification only is our standard specification arrange. Other specification of ship launching airbags also available upon clients' request.

Application:
1. Shipwreck salvage.
2. Floating bridge and dock construction.
3. Rescue and remove of wrecked ship.
4. Can be used as pontoons for supporting docks and other floating structure.



We are a manufacture of airbag, the raw material also manufactured by ourselves, the best quality at the reasonable price. In addition, We promise that the product can be returned due to quality problem within one year; And we provide maintenance technology for free and the required raw material
Ship airbag up-to-slipway lauching is an advanced technology with bight prospect, which has got over the shortcomings of previous ship building factory's traditional technology-being restricted to sliding way, elevator box ,etc, and developed into a flexible up & down -to-slipway technology, with such advantages as labor saving, time saving, strength saving, investment saving, being flexible, safe, reliable, and obvious economic benefit.

Suitable processing technique: cutting and beading of hardware products.

Applicable to: stainless steel products including pan, bowl, dish, cover, basin, cup and more.

Available material shapes: round.

Beading on the edges reducing the sharpness and preventing it from getting bent. Trimming the ware's edge to prevent sharpness and neat, beutiful edge.

Combinated with automatictly feeding and discharging robot to realize fully automatic line for safe production.

Semi-automatic Beading and Trimming Combine Machine

Beading and Trimming Machine,Cutting and Beading Machine,Semi-Automatic Combine Machine,Automatic Production Line

Shantou Jiesheng Robot Technology Co. Ltd. , http://www.stjsrobot.com