The mango dryer developed by Yueqing people is on CCTV.

At 18:50 on October 17th, Qingyuan inventor Huang Yuanzhang appeared in the "I Love Invention" section of the CCTV Science and Education Channel for inventing the mango dryer.

After the show was aired, Huang Yuanzhang became a "celebrity". In fact, he has long been a well-known invention enthusiast in the Qingjiang and Hongqiao areas. He has obtained 15 utility model patents. There are two invention patents pending approval, involving drying and air energy.

On October 19th, the All-Media Journalist of Yueqing Daily saw the inventor and visited the story behind his invention.

Inspired by the son who loves to eat mango

"I was not selected to be selected by CCTV. I was very surprised when I received the call in the first half of this year." Although Huang Yuanzhang was introverted, he talked about inventions but his ideas were quick and endless. He said that after the TV broadcast, he suddenly fired. On the same day, he received more than a dozen telephone calls from merchants from Northeast China, Henan, Hebei, Yunnan and other places. They all booked machines, including roses, Tianma, Sanqi, etc. .

The reporter saw this mango dryer, which is 2.73 meters long, 1.05 meters wide and 1.92 meters high. After turning on the power supply and carrying out the intelligent setting of 40 degrees temperature and 13% humidity, Huang Yuanqi puts the sliced ​​fresh mango into it, can dry 100 kg at a time, and intelligently operate the whole process without manual supervision. After 10 hours, the dried mangoes are freshly baked, the taste is sour and sweet, and the hardness is moderate.

Huang Yuanzhang said that the invention of the mango dryer originated from accidental, his son likes to eat mangoes. He usually uses his microwave oven to make dried mangoes for his son. It takes a long time and takes a long time. He wondered if he could make a machine to dry mangoes? So he started to study. He said that unlike microwave ovens, the biggest difference between mango dryers is the heat source. With a small amount of electric drive, the heat in the air is absorbed and placed in the oven. The air is sucked through the outdoor fan, and the air is sucked to the surface of the finned heat exchanger to exchange heat with the refrigerant in the finned heat exchanger. The refrigerant absorbs the vapor and then enters the compressor to form a high temperature and high pressure refrigerant. , flowing into the condenser, passing through the oven fan, letting the air in the oven flow, thereby drying the mango.

In the experiment, Huang Yuanzhang overcomes various difficulties. For example, when the hot air cover is not comprehensive, the lower layer has been dried, and the upper layer is still wet. He made the deflector and spread it downward through the circulating wind to each chassis; In the case of bubbles, blemishes, etc., he realized that the mango settings of different varieties were different, so he did control of temperature and humidity adjustment. He kept tasting mangoes and ate up to ten kilograms a day. He was familiar with the sweetness and acidity of mangoes, adjusted the processing technology, added finned evaporators, and dehydrated mangoes.

He said with great joy that this dryer can not only dry mango, but also can be used to dry dried fish, ginger, Chinese herbal medicines, etc., to maintain its original taste, nutrition and color, energy saving and environmental protection.

Research invented the devil

Huang Yuanzhang only has a high school education level. In life, he does not smoke, drink alcohol, or play cards. He only has a special liking for invention. Prior to this, Huang Yuanzhang carried out a number of inventions with a bit of strength.

Huang Yuanzhang’s first invention was the clothes dryer. It was the rainy season in 2010. The clothes couldn’t be done. He was very sad. When he passed the air conditioner, he thought about why he invented an air conditioner. Dry clothes?

Therefore, he tried to weld a number of iron plates into square boxes according to the principle of the air conditioner, and set them into a dryer of 1 meter high, 0.8 meters long and 0.5 meters wide, and again the evaporator, condenser, compressor, and section. Four components, such as a flow device, are placed therein. When he studies, he is enchanted, sometimes thinking of an idea, experimenting again and again, often all night long. Three months after the experiment, he achieved an hour of drying clothes.

This success inspired Huang Yuanzhang's enthusiasm for invention, and it has been out of control. His research is based on the principle of drying, using the inverse Carnot principle, absorbing the heat of the air, and transferring the heat into the oven to improve the temperature of the oven, and to achieve the drying of the materials with the corresponding moisture-discharging equipment. His invention also includes dry closets, solar hot air systems and so on.

He told reporters: "When you focus on the things of interest, the time has passed without knowing it. The creation will not be successful once. It often takes hundreds of times and thousands of failures to be satisfied. result."

Since childhood, I like to gong

Huang Yuanzhang is a native of Xieping Village, Qingjiang Town. He is 38 years old this year. He has a flexible mind, loves to think, likes to drums, and often makes small inventions with waste products and old toys.

Since the family had no money to buy toys, when he was seven or eight years old, he pondered the wooden cart that would run with wood and wheels, and made small pistols with wood and chains. At the age of 11, he assembled several abandoned bicycles and built them into unique bicycles. Now, his left thumb is still missing a piece of meat, which he got when he was studying the drums.

The process of invention and creation is boring and requires the willpower to "sit on the cold bench." Huang Yuanzhang said: "The process is hard, and the interest will not be boring. I really like it. When I meet those who haven’t seen it outside, I want to figure out the principle and even think all day and night until I think about it. So far, there is never a chance to learn."

After attending work in 2005, Huang Yuanxue studied molds, made sales, and studied economic management.

As a layman, his interest is his best teacher. He later worked in Zhejiang Zhengli Shengneng Technology Co., Ltd. and became an engineer. He likes to find information on his own. Online, he often goes to Wenzhou and Hangzhou to attend classes. He won a bachelor's degree in cryogenic refrigeration and is now preparing for a master's degree. He said that if you don't study today, you may be eliminated tomorrow.

【Collect this page】 【Print this page】 【Close】

Nanpi Jiantong Hardware Manufacturing Co.,Ltd. offers a wide range of Deep Drawing services.

Material grade: stainless steel 304, stainless steel 316

                     steel DC01,DC04,ST12,Q235,SJ235R

                     galvanized steel sheet DX51D

Stock thickness ranges from 0.30mm-6.0mm for stainless steel

                                        0.30mm-3.0mm for copper

                                        0.30mm-6.0mm for aluminum

                                        0.20mm-6.0mm for carbon steel

Surface finishing: polishing, satin blasted,powder coating, electro plating,anodize

Application: motor housing, metal cover, caps etc. 

Deep Drawing Parts

Deep Drawing Parts,Deep Drawing Sheet Metal,Deep Drawing Steel,Custom Deep Drawing Parts

Nanpi Jian Tong Hardware Manufacturing Co., Ltd. , https://www.sheetmetals.nl