9500lbs off Road 4X4 Zhme off Road Winch

• Model NO.: PS9500
• Power Type: Series Motor DC
• Electric Winch Model: off Road
• Brand: Zhme
• Certification: GS, CE, RoHS
• Rated Line Pull: 10000lbs (4536kgs) Single Line
• Gear Train: 3 Stage Planetary
• Clutch: Sliding Ring Gear
• Fairlead: Roller Fairlead for Wire Rope
• Packing: 620mmx200mmx390mm(420PCS Per 20′ Container)
• Transport Package: 1 Winch 1carton, 15cartons on 1 Pallet
• Origin: Ningbo, China

• Type: Electric Winch
• Pull Direction: Forward
• Working Voltage of Electric Winch: Low Voltage
• Applicable Environment: Mountain Road
• Product Name: Zhme Electric Winch
• Motor: Series Wound 5.5 HP /4.0 Kw,12V DC
• Gear Ratio: 265:1
• Braking Action: Automatic in The Drum
• Wire Rope: 9.5mm *25m
• Trademark: ZHME
• Specification: N. W.: 84lbs (38kgs)
• HS Code: 84253190

Features: 
1. Popular series winches with good quality at a very competitive price
2. The best choice for off road newcomer.
3. 12V volt high performance series wound motor for power and fast line speed.
4. High-efficiency, lower noise steel 3-stage planetary gears.
5. Low noise, reliable & stable performance braking system.
6. Aircraft grade wire rope, or synthetic rope is optional.
7. Remote switch & wireless remote control being alternative.



Specification: Shipping Service:
We can arrange you transportation, we have our own shipping and express company, or we can use your forwarder.
 

How to choose a ZHME Winch for your vehicle
Can't decide which winch is right for you? The best way to choose is to calculate the line pull needed for the application. To do this multiply your vehicle's Gross Vehicle Weight (GVW) by 1.5 - this will give an approximation for how big your winch should be. Typically, the first layer of rope around the drum is the max load the winch is capable of. Each additional layer deducts about 10% off the rated line pull. So for a winch rated 9,500lbs, the second layer will pull 8,550lbs, the third 7,700lbs, etc. A loss of pulling power can also be experienced when the rope isn't spooled evenly on the drum. So re-spool your winch before you go out!

 

Plastic Recovery Tracks, Recovery Traction Tracks,Sand Tracks,4WD off-Road Traction Board, Sand/Snow Ladder

Outback Australia is a place which is very inhospitable. If you didn`t prepared well for recovering your vehicle from sand, snow or mud among your trip, you might be crazy that your vehicle was in for a long night.So it is necessary to prepare a well Recovery Traction Board for your trip.

History of Sand Ladder

Without any doubt, people have been making sand recovery tracks since the development of the first motor vehicle and sand ladders are definitely not a new invention. However, the first commercially available sand ladder was invented by the U.S. Army and commenced manufacture in 1941 called Marsden Matting. It was extremely functional and was primarily used for the fast temporary construction of air fields and vehicle tracks on soft and muddy ground. An estimated 800 million square feet of Marsden Matting was manufactured during World War II.

Later Marsden Matting became known as PSP (perforated steel planking) and was constructed from a magnesium steel alloy. It was also manufactured from aluminium and called PAP which weighed significantly less than it's steel counterpart. This military surplus PAP became the first sand ladders to be commonly used by 4wd enthusiasts and was popular on the roof racks of Land Rovers.

World War II Sand Ladder

Steel and aluminium Sand Ladders were used in WWII to build temporary air fields and roads. It was called Marsden Matting or later PSP or PAP. It was a quick solution to allow vehicles through soft and muddy ground.
4wd vehicle owners often still make use of these types of sand ladders and offer a military look on the outside of some Land Rovers.

Definitions:

Sand Ladders

A Sand Ladder is any rigid formation of steel, aluminium or plastic device that provides some strength for use in bridging and ramping also.

Sand Mats

A Sand Mat is a soft carpet-like device that is flexible and includes a variety of rubber matting and rolling segments.

Bridging Ladders

Often Bridging Ladders are far more bulky and maintain a lot more strength when used in bridging or ramping configurations and their size should be considered when purchasing.

Plastic Sand Ladders

Moulded in high visibility Reinforced Engineering Plastic, they stand out as a light weight, easy to handle alternative to the aluminium and steel counterparts. With moulded lugs for grip on the top and underneath, they work brilliantly for easy sand ,snow and mud recovery.

Advantage:

· Best performance in snow,mud ,sand and wet conditions

· Light weight, at 4.00kgs for the pair

· No sharp edges

· Easy to carry

Plastic Recovery Tracks

Sand/Snow Tracks,Recovery Snow Tracks,Road Sand Track,Auto Snow Tracks,Recovery Traction Tracks

NINGBO LUBAN ELECTRIC POWER TOOLS CO.,LTD. , https://www.aye-group.com