Alternator 12V 130A Cw for Denso Toyota Lester 11137 104210-4571

We control the raw material with strict standard, especially for the copper wire. We use 10# steel and good magnet materials. Production Equipment: 
The armature and stator are produced by automatic equipment.
 
Inspection equipment:
 
We have more than 60 quality inspection equipment. We can inspect all items according to starter GB standard and analyze the quality differences.
 
Armature, stator, solenoid switch and the starter assembly are all 100% inspected.
 
Whole set laboratory equipment:
 
We have whole set laboratory equipment for the starter performance test.
 
Market share:
 
We are No 1 for single cylinder diesel engine starter production in China. The annual selling quantity is more than 400000 sets.
 
Experiences:
Plentiful Experience to ensure quality
Most of our workers are with more than 10 years even 20 years experiences.
Our R&D engineers are also with more than 20 years experiences.
 
9.  After-sales service:
Good and fast response for after- sale Services
Once we receive quality problems complaint, we will reply customer within 5 hours, if domestic customers, we our engineers will go to solve the problem in the spot as quick as possible.
Competitive price ------
 
Over 90% parts produced by our own factory
 
Regular Starters, Next Day Delivery.
Save Money Repair it, Do not replace it.
1 year warranty
100% brand new product
   
Major product family: 
    Alt: CS, AD, ND, Ford, SI, Leece Neville, Marelli, Bosch, Valeo, Mitsubishi, Lucas, etc.
    Str: Ford PMGR, PG260D/G/L/F1/F2/M, Bosch, Valeo, Mitsubishi, etc.
 Market (%): 
     North America 60%; Middle East 15%; Europe 15%; Local 10%.
 
 
We are specialized in Auto alternator and starter motor since 2000. Quality first, price second. Usually, our alternator and starter motor can match with each other smoothly in the same model Vehicle.
 
Our company boasts a high-quality management team from top to bottom for the purpose of an efficient operation system. We control every part and every working procedure strictly because we regard product quality as a basis of our corporate development. Based on the original ISO9001: 2000 International Quality Management System, all links of our production and management are strictly guided by the standard of ISO/TS16949

  We control the raw material with strict standard, especially for the copper wire. We use 10# steel and good magnet materials. Production Equipment: 
The armature and stator are produced by automatic equipment.
 
Inspection equipment:
 
We have more than 60 quality inspection equipment. We can inspect all items according to starter GB standard and analyze the quality differences.
 
Armature, stator, solenoid switch and the starter assembly are all 100% inspected.
 
Whole set laboratory equipment:
 
We have whole set laboratory equipment for the starter performance test.
 
Market share:
 
We are No 1 for single cylinder diesel engine starter production in China. The annual selling quantity is more than 400000 sets.
 
Experiences:
Plentiful Experience to ensure quality
Most of our workers are with more than 10 years even 20 years experiences.
Our R&D engineers are also with more than 20 years experiences.
 
9.  After-sales service:
Good and fast response for after- sale Services
Once we receive quality problems complaint, we will reply customer within 5 hours, if domestic customers, we our engineers will go to solve the problem in the spot as quick as possible.
Competitive price ------
 
Over 90% parts produced by our own factory
 
Regular Starters, Next Day Delivery.
Save Money Repair it, Do not replace it.
1 year warranty
100% brand new product
   
Major product family: 
    Alt: CS, AD, ND, Ford, SI, Leece Neville, Marelli, Bosch, Valeo, Mitsubishi, Lucas, etc.
    Str: Ford PMGR, PG260D/G/L/F1/F2/M, Bosch, Valeo, Mitsubishi, etc.
 Market (%): 
     North America 60%; Middle East 15%; Europe 15%; Local 10%.
 
 
We are specialized in Auto alternator and starter motor since 2000. Quality first, price second. Usually, our alternator and starter motor can match with each other smoothly in the same model Vehicle.
 
Our company boasts a high-quality management team from top to bottom for the purpose of an efficient operation system. We control every part and every working procedure strictly because we regard product quality as a basis of our corporate development. Based on the original ISO9001: 2000 International Quality Management System, all links of our production and management are strictly guided by the standard of ISO/TS16949

 

LINA Disassemble Dispersion Kneader

LINA  disassemble dispersion kneader provides excellent cleaning performance especially for sticky materials. Without affecting dispersion kneader's mixing effect, the rotor can be separated easily from the mixing chamber. This type of dispersion Internal Mixer is suitable for a variety of materials and able to provide a better performance dust seal for preventing material leakage.

 

Special design for CIM & MIM

1. Higher cleanness: Clean up the material without dead corners; the mixing chamber and rotors of the dispersion kneader can be separated completely; All surface that directly contact with the material is mirror polished, which ensure all the materials easy to clean without stickiness.

2. Wearable inner cavity: Imported special new alloy steel and vacuum heat treatment are adopted. Strong wear resistance, resistance to horizontal erosion, corrosion resistance and high glossy finish effects are achieved.

3. Adjustable rotor speed ratio: The speed ratio of rotors is adjustable, which target at some special material function requirements and achieve best dispersion effect and efficiency. The kneader with adjustable rotor speed ratio is designed especially for those materials that are sensitive of temperature/high require of different temperature/fast change rate of temperature/fast and span molecular chain diversification.

4. Temperature control system: A lot of trials report that stage temperature control has the essential effect of ceramics` color difference. 

5. PLC intelligent control system: 1. Real-time data record and export of kneading time, temperature (mixing chamber and front/rear rotors), ram pressure, current, torque and recipe code. 2. The control system can be set up to 20 mixing steps, save 20 recipe spaces. 3. The control system is capable of remote importing of the process recipe and data monitoring, and communicating with MES via Ethernet communication interface.  4. An Ethernet communication interface and 20% of the control points are reserved. Touch screen is provided.

 

 

 

Specifications of LINA Disassemble Dispersion kneader

 

Type	Size (L)	Dimension (mm)	Weight (kg)
LN disassemble dispersion kneader	0.5	1600*900*1900	800
	1	1600*900*1900	800
	2	1600*900*2000	900
	3	1600*900*2100	900
	5	1900*1000*2100	1200
	10	2200*1350*2150	2500

Disassemble Kneader

Disassemble Dispersion Mixer,Disassemble Kneading Machines,Rubber Disassemble Dispersion Mixer,Ceremic Disassemble Mixer

LINA Machinery Industrial Co.,Ltd , https://www.linakneader.com