Electric & hydraulic driven winches are supplied in the range of 24mm U3 chain to 87mm U3 chain. The new maritime winches are of modular type,this means various combinations are available. New maritime Winches are made of high tensile materials and therefore compact and low weight.
New maritime winches are designed in such a way that minimum maintenance is required ,The energy consumption is taken into account with high efficient bearings and effective controls systems.
. Stepless control of winches, locally or remote.
. Effective and safe operation.
. Maximum protection of drive and control parts. no loose piping on the deck.
. Quality components of suppliers with worldwide service network.
. Various potions on dimensions possible.
. Full system operation bulid into the winch.
. Compact design with high levels of reliability and efficiency.
. The electro motor has a stand standstill heating and is overload protected by PTC.
. Certification by all major classification societies possible.
. Very low maintenance. all wear and tear parts are of stainless steel.
OPTIONS AND EXTRAS
. Speed control system for paying in the chain to prevent damage to the hull and anchor pocket
. Automatic speed control system for paying"out" the chain and anchor(automatic anchor drop system)
. Automatic mooring operation by means of self-tensioning
. Low speed option for clutch operation
 . Hydraulic or pneumatic operated clutch
. Hydraulic or pneumatic operated brakes
. Alarm signal to the boards alarm system
. Higher levels of water tightness above IP56
. Load measurement indication
. Chain length measurement system
. Oil cooling system optional
. Finished with full paint system
. Radiographic controls
. Remote controls
. Footswitch operation
| Product Details | Type of Marine Hydraulic Anchor Windlass |
|
1,Name: 14-58mm double Gypsy double/single Drum marine hydraulic anchor windlass 2,Driven: Electric / Hydraulic / Diesel / Manual 3,Loading capacity:0.5~200 ton or customized design; 4,Wire rope capacity:20~3600m or customzied design; 5,Working speed:5~20 m/min or customized design; 6,Power supply:220~690V,50/60HZ,three phase or customized design. |
Â
TYPE |
 LOAD (KN) |
 SPEED (m/min) |
 CHAIN DIA (mm) |
 POER (KW) |
17.5Â |
11.5 |
≥9 |
17.5 |
7.7 |
19/22Â |
13.5/18.2 |
≥9 |
19/22 |
7.7 |
25Â |
28.5 |
≥9 |
25 |
7.7 |
28/30/32Â |
33.3/38.3/43.5 |
≥9 |
28/30/32 |
11.3/11.3/14.7 |
34/36 |
49.1/55.1 |
≥9 |
34/36 |
14.7/19.41 |
38/40 |
61.4/68 |
≥9 |
38/40 |
24-48 |
42/44 |
75/82.3 |
≥9 |
42/44 |
24-48 |
46/48 |
89.9/97.9 |
 ≥9 |
46/48 |
24-48 |
150 |
103/118.4 |
≥9 |
150 |
24-48 |
52/54 |
128.4/138.5 |
≥9 |
52/54 |
45/50 |
Production Flow:
Â
 Marine equipment and parts supplying (including Marine doors, Marine windows, Deck outfitting, Anchors, Chains, Hatch covers, Windlass, Capstan, Airbags and Mooring ropes etc.)
 Production and Processing comply with samples and drawings of buyers
Senior Management at all our facilities, ensuring communication is open & easy
Good service and after-sale service to ensure the satisfaction of our clients
Certificate:
Â
My company for deep hole boring and production equipment, production of single steel tube length can reach 12 meters, 180-630 - mm inner diameter, outside diameter, 220-820 - mm, wall thickness can reach 15-150 - mm, the equipment and technology to solve the large diameter hydraulic cylinder under the situation of unable to do cold drawn, deep hole machining of steel tube wall.
Honing the hydraulic cylinder is in of the inside hole by blank hot-rolled tube processing, key performance indicators are: such cylinder material, tensile properties, yield strength, elongation, surface hardness, diameter tolerance, inner hole, inner hole straightness, roughness material usually have 20 #, 45 #, 16 mn, ST52, such as material, the whole steel tube do heat treatment is to stress relieving, outer surface with acid pickling phosphating after anti-rust oil daub antirust processing, is done in the large deep hole boring cutter adopts: rough boring cutter, half fine boring cutter, boring cutter, rolling cutter head combined four monomer, rolling pressure head at the last surface under stric extrusion molding, to achieve expected diameter size tolerance, inner hole surface of high strength, high degree of finish, high resistance to wear.
Inner hole machining process: flat head, chamfering, rough boring, boring, boring, honing or rolling, pipe inner hole straightness of this process can reach 0.2 mm/m or less, basic can eliminate the processing technology of hot rolled tube wall thickness difference, is an important equipment of the production of large diameter hydraulic cylinder.
Hydraulic Cylinder Tube,Hydraulic Cylinder Honed Tube,Rolling Burnished Hydraulic Cylinder Tube,Rolling Burnished Hydraulic Cylinder Tube
Yangzhou Yinhe Machinery Co., Ltd , http://www.yinhesteeltubes.com