- Model NO.: dn20-dn200
- Connection Form: Flange
- Function: Ddcv Double Lobe, Nrvr Silence, Sfcv Rubber Lobe, Nrvz Silence, Nrvg Silence
- Flow Direction: Reversing
- Application: Industrial Usage, Water Industrial Usage, Household Usage
- Nominal Pressure: ANSI150, 300, 600lb; JIS10, 16, 20, 30,
- Thread: DIN, NPT, RC, Bsp, G etc
- Transport Package: Seaworthy Packing
- Origin: Tianjin, China
- Material: Cast Steel
- Structure: Butterfly
- Sealing Form: Gland Packings Globe Valve
- Standard: ANSI
- Type: Single Seat, Double Seat, Sleeve
- Connection: Flange: FF, RF, Rj and LG, Flanged Standard
- Trademark: GHL
- Specification: dn20-dn200
- HS Code: 8481804090
Flow control valveÂ
Valve body
Type: Single seat, double seat, sleeve
Nominal diameter: DN20-DN200
Nominal pressure: ANSI150, 300, 600LB; JIS10, 16, 20, 30,
40K; PN1.6, 2.5, 4.0, 6.4MPa
Connection: Flange: FF, RF, RJ and LG, Flanged standard
ANSI B16.5, JIS B2201, JB/T79.1 PN1.6MPa, JB/T79.2
Thread: DIN, NPT, RC, BSP, G etc
Welding: GB12224-89
Sealing surface: PN16 convex surface, PN40, PN63, PN100
concave surface
Material: WCB, 304, 316, 316L
Bonnet: Standard type (-20ºC ~+200ºC )
Low temperature type (-60ºC ~-196ºC )
Cooling type (-40~450ºC )
Bellows seal type
Gland type: press plate
Packing: V type PTFE, fl exible graphite
Valve components
Core type: single seat plunger type, double seat, sleeve
Core seat: 304, 316, 316+ SLT
Flow characteristics: Equal percentage, linear, quick-opening
Actuator
Type: Electric actuator
Action type: Direct action, reserve action
Control type: Proportional or switch type
Input signal: 4-20mA, 0-10V, 1-5V, ON-OFF
Output signal:4-20mA or passive contact signal
Power: AC220V, AC380V, DC24V, etc
Explosion-proof class: ExdIIBT4, ExdIICT6 or others (Optional)
Manual device: with handle
Accessories (Configured according to requirements)
heater, overload protection
Performance
Rated KV value: Reference table
Flow characteristics: Linear, equal percentage, quick opening
Adjustable range: 50:1
Leakage class
Metal seal: Less than 0.01 (ANSI B16.104-1976IV)
Soft seal: Less than 0.00001%
Hysteresis: ≤ 1%
Dead zone: ≤ 1%
Basic error: ± 1%
Valve body
Type: Single seat, double seat, sleeve
Nominal diameter: DN20-DN200
Nominal pressure: ANSI150, 300, 600LB; JIS10, 16, 20, 30,
40K; PN1.6, 2.5, 4.0, 6.4MPa
Connection: Flange: FF, RF, RJ and LG, Flanged standard
ANSI B16.5, JIS B2201, JB/T79.1 PN1.6MPa, JB/T79.2
Thread: DIN, NPT, RC, BSP, G etc
Welding: GB12224-89
Sealing surface: PN16 convex surface, PN40, PN63, PN100
concave surface
Material: WCB, 304, 316, 316L
Bonnet: Standard type (-20ºC ~+200ºC )
Low temperature type (-60ºC ~-196ºC )
Cooling type (-40~450ºC )
Bellows seal type
Gland type: press plate
Packing: V type PTFE, fl exible graphite
Valve components
Core type: single seat plunger type, double seat, sleeve
Core seat: 304, 316, 316+ SLT
Flow characteristics: Equal percentage, linear, quick-opening
Actuator
Type: Electric actuator
Action type: Direct action, reserve action
Control type: Proportional or switch type
Input signal: 4-20mA, 0-10V, 1-5V, ON-OFF
Output signal:4-20mA or passive contact signal
Power: AC220V, AC380V, DC24V, etc
Explosion-proof class: ExdIIBT4, ExdIICT6 or others (Optional)
Manual device: with handle
Accessories (Configured according to requirements)
heater, overload protection
Performance
Rated KV value: Reference table
Flow characteristics: Linear, equal percentage, quick opening
Adjustable range: 50:1
Leakage class
Metal seal: Less than 0.01 (ANSI B16.104-1976IV)
Soft seal: Less than 0.00001%
Hysteresis: ≤ 1%
Dead zone: ≤ 1%
Basic error: ± 1%
| Items | ADF-2F | ADF-20F | |
| Applicable pressure | Max. 10 kgf/ cm2g | Max. 20 kgf/ cm2g | |
| Applicable fluid | Hot & Cold Water | ||
| Flow temperature | Max. 170C | ||
| Structure | DIAPHRAGM | ||
|  Differential pressure adjustment range  |  0.1-1.5, 0.5-2, 1.5-5 kgf/ cm2 | ||
| Flow adjustment range | 3.3-100% of rated flow | ||
| End connection | Â Â ANSI 150Lb/JIS 10K RF FLANGE Â Â | Â Â ANSI 300Lb/JIS 20K RF FLANGE Â Â | |
| Materials | Body | Cast iron | Cast steel |
| Disc/Seat | Stainless steel, Cast bronze | ||
| Diaphragm | EPDM | ||
| Hydraulic Test Pressure |  15 kgf/ cm2 g  |
 30 kgf/ cm2 g   |
|
Â
The Ignition Distributor For MITSUBISHI:
Mitsubishi is a household name in the word, has several well-known vehicle models and engines, Such as Lancer EVO, 4G63, still very popular until today.
Also, the Malaysia Proton SAGA which is using Mitsubishi platform.
As the key component of these engine`s ignition systems, we can offer you a full range of distributor models for MITSUBISHI, 4G63, 4G32, 4G53, 4G54, 4G64, 4G93, SAGA 12V
Distributor for MITSUBISHI,MITSUBISHI Distributor,MITSUBISHI Lancer Distributor
Ningbo Holsam Trading Co.,Ltd. , http://www.holsam-autoparts.com