Auto Care Product Engine Carbon Cleaner for Car Maintenance

HHO Oxy-Hydrogen Generator for Car Engine Carbon Cleaning

The HHO Oxy-Hydrogen Generator is a cutting-edge solution designed specifically for car engine carbon cleaning. This advanced device uses a unique electrolysis process to generate hydrogen and oxygen gases that effectively remove carbon deposits from engine components. Ideal for auto repair shops, service stations, and maintenance centers, this machine offers a quick and efficient way to improve engine performance while reducing emissions.

With over 100 automotive maintenance partners across North America, the HHO generator has proven to be a profitable investment. Each vehicle cleaned can generate between $50 to $100 in revenue. If you clean 10 cars per day, you could potentially earn up to $1,000 daily, $30,000 monthly, and $360,000 annually. With just two machines, your return on investment can be achieved within one month. If not satisfied, Kingkar guarantees a full refund with no cost involved.

The Science Behind HHO Technology

Principle 1: Electrochemical Reaction
Anode reaction: 4OH⁻ → 2H₂O + O₂↑ + 4e⁻ (from KOH ionization)
Cathode reaction: 2H⁺ + 2e⁻ → H₂↑ (from water ionization)

Principle 2: Water-Hydrogen Circulation
The generator produces a 2:1 ratio of hydrogen and oxygen gas through electrolysis of an alkaline solution. These active atoms help break down long hydrocarbon chains, acting as catalysts in the pyrolysis process. The result is a complete water cycle, making the system both efficient and environmentally friendly.

Whether you're looking to enhance your business or improve engine efficiency, the HHO Oxy-Hydrogen Generator is a powerful tool that delivers real results. With its easy operation, durability, and high return on investment, it's an excellent choice for any automotive service provider aiming to stay ahead in the market.

Swing Bearing

Introduction to ZW Swing Bearing

Established in 2020 and officially put into the market in 2022, it is one of the leading products of Xingtai Zhongwei Zhuote Hydraulic Technology Co., Ltd. Widely used in construction machinery, engineering machinery, port machinery, metallurgy machinery, light industry machinery, wind power generation, medical CT, military industry and other fields, and exported to Europe, America and Southeast Asia in batches.

Product introduction and category

1. Product introduction:

As the "joint of the machine", the Swing Bearing is an important transmission component necessary for the machine that needs relative slewing motion between two objects and bears axial force, radial force and tilting moment at the same time; It is a mechanical component integrating supporting, rotating and fixing functions, which can greatly simplify the manufacturing, installation and maintenance of the host.

2. Classification of Swing Bearing:

In order to adapt to different use requirements, there are many structural types of Swing Bearings.

(1) The rolling elements can be divided into point contact type and line contact type according to their types;

(2) It can be divided into single-row, double-row and three-row roller types according to the structure type;

(3) It can be divided into internal toothless type and external toothless type according to the gear form.

ZW "Swing Bearing mainly produces single-row four-point contact ball Swing Bearing.

1. Introduction to single-row four-point contact ball Swing Bearing

It is mainly composed of outer ring, inner ring, ball, spacer block and sealing belt. The four-point contact between ball and arc raceway can bear radial load, axial load and tilting load at the same time. Small and medium-sized engineering machines, such as small and medium-sized cranes and excavators, hydraulic excavators, rotating machinery, large and medium-sized excavators and other engineering machinery can be selected.

2.Features of point-contact ball Swing Bearing:

(1) The nominal contact between rolling elements and raceways is point contact (in fact, it becomes surface contact after being loaded, but the contact surface is still small), and the slewing resistance is small;

(2) The manufacturing error of raceway, installation clearance, elastic deformation of rolling ring and seat frame have little influence on the contact condition, so the above points are less sensitive to the bearing capacity;

(3) The contact stress is higher than the line contact, and the shear stress formed under the surface of the raceway during movement is larger, so the dynamic bearing capacity is lower than the line contact;

(4) The raceway section is curved, so it is slightly difficult to process and grind.

3. Production strength

ZHTE HYDRAULIC has an existing rolling production line for Swing Bearings, which can produce single-row row Swing Bearings. Carefully select medium carbon alloy steel as the raw material, and produce the raw blank through the rolling production line. This process can accurately control the accuracy of the blank, change the material performance, reduce the material stress, improve the material density, greatly improve the wear resistance of the material, and extend the service life of the parts.

4. Production process

The following operations will be carried out after the inspection of the original blank is qualified:

(1) Thermal stress relief of blank

(2) ROUGH TURNING - FINISH TURNING - DRILLING - SERRATION - FINISH GRINDING

(3) Raceway quenching treatment

(4) Gear quenching treatment

(5) Product inspection

Billet inspection - tempering inspection - quenching depth inspection - crack inspection - with clearance inspection - assembled finished product inspection

(6) Install the nameplate

Our products

include: Excavator Hydraulic Pump, Excavator Final Drive ,Excavator Swing Motor, Excavator Travel Reducer, Excavator Swing Reducer,Swing Bearing,Hydraulic Breaker.

Swing Bearing For Excavators,Excavator Swing Bearing,Swing Bearing Excavator,Swing Bearing For Excavator,Excavators Swing Bearing

XINGTAI ZHONGWEI ZHUOTE HYDRAULIC TECHNOLOGY CO.,LTD , https://www.zwzhtehydraulic.com