It must be known that everyone should know that the current CNC cutting machine is a numerical control system that is operated by a computer. Therefore, the cutting efficiency of the CNC cutting machine is much higher than that of the manual operation. However, this cannot mean that it has no disadvantages. The main problem is that the accuracy and control of the cutting flame are still not very precise. In addition, the service life of the wearing parts needs to be taken into consideration. When CNC cutting plates are used under normal circumstances, it is better to cut from the edges when the width and cut. When the seam quality meets the requirements, it will be transferred to the formal part blank. This distance between us is called the introduction line. Of course, the length of the lead-in line will also change with the cutting board thickness, material and cutting energy, etc., generally within the range of 1-10mm. In addition, the location design of the lead-in line also changes as the cut-and-reserve part is cut.
In summary, when the cut is saved as an external model, the orientation of the introduction line should be within the generalization; when the cut preservation section is the generalization, the opposite is true. In addition, in the introduction of line design, we should consider the loss of the entire board, its position as far as possible to think about the margin and the top corner is more suitable to reduce data loss.
In the introduction of the outgoing line compensation surface, a small number of CNC systems will provide similar functions. Taking the TS series CNC system as an example, the supplied lead line compensation method can effectively deal with the quality problem of the cutting point over burning and leaving scars. According to the requirements of welding or machining, the user can independently select the cut-point to burn, leave the small tail, or approximate the smooth starting point of the introduction method.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /
FURD ride on asphalt roller features:
-Articulated movement with power-assist provides accurate, positive steering control and increases maneuverability in confined job sites;
-Adopts full hydraulic transmission, infinitely variable speed, double drums hydraulic driving, it`s hydraulic vibration asphalt roller, flexible and easy to operate;
-Compact design structure, can worked at narrow area;
FURD manual tandem Road Roller features:
-Adopts Danfoss hydraulic pump, infinitely variable speed;
-Hydraulic control walking, two drums equipped with two hydraulic motors
-Hydraulic turning, tandem road roller turned by button control, easy to operate;
-Deadman control lever offers reversing protection.
FURD single drum hand roller compactor
-Light weight, easy to operate;
-Full hydraulic transmission, infinitely variable speed;
-Hydraulic motor driving;
FURD Vibratory Road Roller Catalogue:
-2900kg Ride on Asphalt Roller, 1700kg Ride on Asphalt Roller, 1000kg Ride on Asphalt Roller, 800kg Ride on Asphalt Roller;
-800kg Tandem Road Roller, 550kg Tandem Road Roller;
-500kg Hand Roller Compactor, 325kg Hand Roller Compactor, 200kg Hand Roller Compactor
FURD factory also produce the below machines:
Laser Screed , Power Trowel, Light Tower , Road Repair Machine, Road Marking Machine.
For more information of our products, please feel free contact with us, we are at your service for 24 hours.
Vibratory Road Roller,Hand Roller Compactor,Tandem Road Roller,Road Roller Machine,Mini Road Roller,3 Ton Road Roller
Jining Furuide Machinery Manufacturing Co., Ltd. , https://www.furdroller.com