First, inside and outside maintenance 1. Finish the sawing machine and auxiliary tools 15 minutes before work, wipe the machine tool, remove iron filings, dust, oil, and relax the saw.
2. Inspect the screws on each part to see if the nut, handle, and handle ball are loose or damaged. Keep the sawing machine in good condition.
3. Regularly disassemble the relevant cover to wipe the internal parts, so that the inside and outside of the sawing machine are clean, intact and prevent rusting.
Second, hydraulic, transmission system 1. Wipe the rails and sliding surfaces 15 minutes before work.
2. Periodically clean the worm gear box, adjust the gap between the transmission parts, and fasten the bolts and nuts of each part.
3. Lubrication System 1. Before starting the band sawing machine, lubricate the various parts of the sawing machine according to the lubrication instructions.
2. Regularly check whether the concentration of lubricant and the amount of emulsified chip fluid in the worm gear box and in the tank are in place.
3. Regularly clean all parts of the lubrication mechanism to keep the oil line free from leaks.
4. Check whether electrical equipment, motors, cables, switches, and lighting are intact and safely grounded before driving.
2. Inspect the screws on each part to see if the nut, handle, and handle ball are loose or damaged. Keep the sawing machine in good condition.
3. Regularly disassemble the relevant cover to wipe the internal parts, so that the inside and outside of the sawing machine are clean, intact and prevent rusting.
Second, hydraulic, transmission system 1. Wipe the rails and sliding surfaces 15 minutes before work.
2. Periodically clean the worm gear box, adjust the gap between the transmission parts, and fasten the bolts and nuts of each part.
3. Lubrication System 1. Before starting the band sawing machine, lubricate the various parts of the sawing machine according to the lubrication instructions.
2. Regularly check whether the concentration of lubricant and the amount of emulsified chip fluid in the worm gear box and in the tank are in place.
3. Regularly clean all parts of the lubrication mechanism to keep the oil line free from leaks.
4. Check whether electrical equipment, motors, cables, switches, and lighting are intact and safely grounded before driving.
Plastic Hanger For Glass Bottle
The plastic hanger for glass bottle is divided into two types, i.e: the stereoscopic plastic hanger for glass bottle and plan plastic hanger for glass bottle. We are sincere to produce the plastic hanger for 50ml glass bottle and plastic hanger for 100ml glass bottle, we are capable of producing on the demand of customers.
Plastic Hanger For Glass Bottle,Plastic Hangers Infusion Glass,Plane Plastic Hanger For Glass Bottle,Flat Plastic Hanger
YANGZHONG HONGYUN BOTTLE CAPS MAKING FACTORY , https://www.hongyunyz.com