1) High-performance Servo Motor: This machine is equipped with a high-speed servo motor that ensures fast response time and precise control. The positioning accuracy can reach up to 0.001mm, making it ideal for high-precision bending operations.
2) Energy Saving & Environmental Protection: The advanced servo motor and hydraulic system significantly reduce energy consumption. It optimizes power usage by only providing the necessary flow and pressure during each stage of the working cycle, resulting in an energy saving rate of at least 50-60%.
3) Noise Reduction:
- High torque allows faster operation and quicker return, improving overall efficiency.
- The servo pump provides only the required flow and pressure, reducing unnecessary energy use.
- The system operates quietly, with noise levels reduced by 5-10 dB, nearly silent in standby mode.
- Lower heat generation and reduced hydraulic oil consumption lead to lower maintenance and running costs.
- The electric-hydraulic drive system is designed to minimize noise based on different working conditions.
Main Configurations:
1. Holland Delem DA56S CNC System – Ensures accurate and reliable control.
2. Germany Rexroth Electro-Hydraulic Servo Pump Control System – Provides precise and efficient hydraulic performance.
3. Synchronous Positioning with RSF Grating Detection – Ensures accurate alignment on both sides.
4. Back Gauge with High-Performance Servo Motor and Ball Screw – Offers precise and smooth movement.
5. WILA Mechanical CNC System with Deflection Compensation – Enhances bending accuracy and consistency.
6. Left and Right Side Doors – Improves accessibility and safety.
7. Simple Linear Guide Front Support Frame – Ensures stability and ease of use.
Galvanized steel sheet is carbon steel sheet coated with zinc on two sides. the process used to do this is known as the continuous hot dip process. this process results in a layer of zinc which adheres tightly to the base steel and has a spangled, or snowflake-type, appearance. The layer of zinc acts as a sacrificial coating.
Galvanised steel is mild steel with a coating of zinc The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel Galvanised steel is one of the most widely used products, used extensively in the building sector, automotive, agricultural and other areas where the steel needs to be protected from corrosion.
Hot-Dip Galvanizing or HDG is a process in which zinc bonds to steel at the molecular level to produce a four-layer corrosion-resistant finish. The first three layers are zinc-iron alloy layers that are actually harder than the base steel. The fourth or top layer is pure zinc.
Galvanized Steel Sheet, Hot Dipped Galvanized, Galvanized Sheet Coil, Gi Sheet
Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhousteel.com