On the 26th, the China Insurance Regulatory Commission announced the 2013 annual motor vehicle traffic accident liability compulsory insurance business. The China Insurance Regulatory Commission has reviewed the relevant reports on the insurance business of 50 insurance companies such as China People's Property Insurance Co., Ltd. according to law. According to the aggregated data, in 2013, the insurance contracted loss of 4.3 billion yuan, investment income of 4.5 billion yuan, operating profit of 200 million yuan, the basic balance of profit and loss in that year. In 2012, the insurance contracted loss was 8.3 billion yuan, the investment income was 2.9 billion yuan, and the operating loss was 5.4 billion yuan.
The relevant person in charge of the China Insurance Association said that due to the relatively good capital market situation last year, the cross-insurance insurance achieved a slight profit, and the financial risks brought about by the long-term operating losses of the cross-strong insurance also eased. In addition, the issue of the rising comprehensive cost ratio of the cross-border insurance, which has been concerned by the outside world, has been further curbed by last year.
According to the disclosure, in 2013, the insurance companies that operated the insurance business jointly insured 147 million vehicles, the total liability for heavy insurance compensation was 178.287 billion yuan, the handling of traffic accidents was 22.53 million, and the rescue expenses were 220,000. It provides a strong guarantee for victims of road traffic accidents to receive timely treatment and compensation. At the same time, the association also urged insurance companies to fully withdraw and pay for social assistance funds for road traffic accidents. In 2013, a total of 2 billion yuan was allocated to the rescue fund. In terms of vehicle and vessel tax collection and payment, the national vehicle and vessel tax revenue reached 47.4 billion yuan last year, an increase of 21% year-on-year.
In addition, from March 2012, foreign insurance companies can apply for the opening of a strong insurance business. In 2013, the China Insurance Regulatory Commission approved five foreign-invested insurance companies, including Meiya, to carry out cross-border insurance business. Up to now, a total of nine foreign-invested insurance companies, such as Zhongbao, Fubon, AVIC, Mengtai, Meiya, Samsung, Allianz, China, and Hyundai, have obtained the qualifications for the insurance business, and the market system for the insurance has been further improved.
PEI plastics (polyetherimide plastics) is an amber transparent solid. It has an inherent flame retardancy and low smoke concentration without adding any additives. The oxygen index is 47%, and the combustion level is ul94-v-0, and the density is 1.28~1.42 g/cm3.
PEI plastics has a strong thermal stability, and even the non-enhanced PEI plastics still has good toughness and strength.Therefore, the high thermal stability of PEI plasticsis used to make high temperature heat-resistant devices.
PEI plastics has excellent mechanical properties, electrical insulation performance, radiation resistance, high temperature resistance and abrasion resistance, and can be used by microwave.The PEI plastics also has good flame retardancy, chemical resistance and electrical insulation.Vitrification transformation temperature is very high, up to 215 ℃.PEI plastics also has a very low shrinkage rate and good mechanical properties.Adding fiberglass, carbon fiber or other fillings to enhance the purpose of modification;And other engineering plastics of heat-resistant polymer alloys, can be in 160 ~ 180 ℃ under the working temperature of use for a long time.
The long-term use of polyether amines in the us underwriters laboratory is 338T and 356T (according to the grade), and the combustion rating reaches UL94V - 0 (10 mille thickness).The oxygen index is 47, and the polyetherimide is in line with the requirements of the aircraft for the requirements of the FAA's flame retardant and thermal release material standards.It has a glass transition temperature of 419F and is allowed to be used intermittently under 392F, at higher temperatures, resulting in a short-term shift.Under 356T, the tensile temperature and flexural modulus were above 41 and 2068MPa respectively.The material reinforced with Glass Fiber and carbon fiber has higher strength and rigidity under the transition temperature of glass.
PEI plastics long-term resistance to creep under high temperature and stress allows it to replace metals and other materials in many structural devices.PEI plastics shows good performance in variable temperature, humidity and frequency.The low dissipation factor at GHz frequency makes the polyetherimide have high microwave wearability.Its ionic pollutant is low, at 250F100 % R.H.And 207kPa after 120 hours of water extraction with the conductivity, at 20 megaohm, it can be used as an electronic sensor element insulation.
PEI plastics is a fine coating and film forming material which can be used for the coating and film of electronic industry, and can be used in manufacturing aperture < 0.1 mu m, with high permeability microporous diaphragm.It can also be used as high temperature adhesive and high strength fiber.
Application field
Since PEI plastics has excellent comprehensive and balanced performance, PEI plastics has been applied to the departments of electronics, motor and aviation, and used as metal substitute materials for traditional products and cultural life supplies.Using PEI plastics instead of metal to make optical fiber connector, PEI plastics can optimize the structure of the component, simplify its manufacturing and assembly steps, and maintain a more precise size.Used in automobile industry, such as high temperature fittings for manufacturing, the high power lamp and light, control the car cabin outside temperature sensor (air conditioning temperature sensor) and the control of air and fuel mixture temperature sensor (effective combustion temperature sensor).Also can be used for high temperature erosion of lubricating oil vacuum pump impeller, distilling apparatus that operate at 180 ℃ of ground glass joints (following), the lighting of anti fog light reflector.
PEI Plastic Sheet,Polyetherimide PEI Sheet,Esd PEI Plastic Sheet,Extruded Plastic PEI Sheet
Dongguan Noegem Plastic Products Co.,Ltd , https://www.noegempLastic.com