RT-IoT Camera is an open-source I / O webcam development board based on RT-Thread open source real-time operating system C / C ++, Lua programming compatible with Arduino, support for wireless transmission, through the Wi-Fi wireless network picture signal Send to smart phones, tablets and other equipment. On the other hand, DIY-capable users can also use the RT-IoT Camera development board to develop their work or connect it to the Arduino development board to make the RT-IoT Camera more versatile.
Ten years did not forget to let IP Camera development easier
RT-IoT Camera Development Board is developed by RT-Thread team from well-known domestic open source embedded operating system. Its motivation for development is that the team members think a development board with IP Camera function is very expensive on the market, so many think In addition, the complex WiFi technology, image processing technology, real-time video streaming technology, etc. are not ordinary developers can immediately handle well.
At the same time, RT-Thread has been released for 10 years since 2006. With the rise of Internet of Things (IoT), the RT-Thread team hopes to show more of RT-Thread to everyone and bring IoT to more people Related intelligent technology (Wi-Fi, network, audio, Camera and other technologies), reduce the learning threshold, increase DIY fun, let it help you to complete your own DIY dreams.
Therefore RT-Thread team and rich Han jointly launched the RT-IoT Camera development board, it will be complex WiFi technology, image processing, video and other technologies for packaging and abstraction, minimizing the developer's threshold, making Users will focus more energy on creativity and imagination, together to create new products.
In order to meet the needs of different levels of makers, RT-IoT Camera development board using the combination of backplane + core module development. The backplane is compatible with the Arduino interface, which can be easily accessed by various Arduino Shields, sensors and the like, enabling quick DIY.
Developers familiar with Arduino can wire the RT-IoT Camera core module to the Arduino board through a serial cable to communicate with each other through the serial port or the SPI mode, so that the Arduino can extend the powerful, easy-to-use and easy DIY IoT Camera function.
Open source, designed for makers
Since the RT-IoT Camera Development Board was built by Maker Creators, it also inherits the spirit of Maker, and RT-IoT Camera uses an open source design. In addition to the Camera function, the development board also has a built-in network audio stream player and interfaces such as GPIO, I2C, SPI and Speak In. In the software part, RT-IoT Camera supports POSIX C / C ++ development environment such as lua script. On software support, the current RT-Thread team provides the following routines:
TFTP, web server way to update the firmware;
Wi-Fi Station mode / AP mode (supports WEP, WPA / WPA2 and other encryption methods);
Camera to 720P mode video into H.264 video and stored to the SD card;
Camera to 720P video recording into H.264 format, and through RTSP TCP or UDP transmission through WiFi;
Camera to 720P video recording mjpeg video stream, provided to the browser view;
Camera to 720P video recording to SD card (H.264 format), and to provide all the way 720P sub-frame for mjpeg browser for browser
At the same time RT-IoT Camera development board will also become RT-Thread open source community follow-up planning function development hardware platform. Follow-up RT-Thread some of the planning functions will be developed on this hardware platform, validation.