Dongfeng School Bus Reminder: Driving Brake Adjustment Please Note
How to adjust the service brake After each 12,000km drive, remove and adjust the service brake, replace the brake shoe or repair and repair the brake drum. Adjustments should be made before loading the wheels, as follows:
1. Make sure the engine brake is turned off before starting the vehicle.
2. When the engine reaches operating temperature, the engine brake switch can be turned on. But at this time, the engine brake will not start working immediately
3. After the engine brake switch is turned on, only when the driver
1 Release the clutch pedal
2 and release the accelerator pedal
3 and the engine brake will start working when the engine is in gear (not neutral) (three conditions are indispensable)
4. When the driver depresses the clutch pedal or the accelerator pedal, the engine brake will be released immediately.
5. The engine speed has an important influence on the engine braking effect: The higher the engine speed, the better the engine braking effect. Recommendation: In order to achieve the best braking effect, keep the engine speed near the rated speed of 1900-2000 rpm (at the junction of the yellow zone and the red zone).
6. In engine braking mode, the engine stops fuel injection, and the engine speed does not affect fuel consumption.
7. To improve the braking effect, the driver can increase the engine speed by lowering the gear.
8. The engine brake should be used with caution on icy or snowy roads to prevent tires from locking or slipping due to excessive braking power.
9. The driver can select the size of the brake power by adjusting the brake gear switch.
10. In the event of an emergency, the driver should depress the brake pedal (ie, the foot of the truck) at the same time. At this time, the braking power will be superimposed and the braking effect will be better.
11. The engine brake is a retarding device, not a parking device. It is not suitable for parking or parking.
12. The engine brake has no damage to the engine and is absolutely safe and reliable. When the engine brake is closed, the normal operating conditions and fuel consumption of the engine are not affected.
CONNECT compact poultry processing system is the lates designed system for small sacle and low investment users ,including the full automatic porcessing line and poultry conveyor line,with its simple installation, convinent operation, low investment, CONNECT compact Poultry Processing Equipment wins many clients from worldwide.
For many users to build one complete slaughterhouse, it takes long time to solve the fiancial, project approvement from local government, land and building required...,
normally involves big investment. But still have many users who don't have big investment for whole project, CONNECT slove this problem for most users, which is the compact poultry processing line equipment is lower investment , and working capacity can reach up to 500BPH.
The system compact birds hanging, stunning, killing, bleeding, scalding, de-feathering, eviscerating, and birds unloading into one.
The working process is first manual hanging the birds to conveyor line shackles --- stunning the birds--- manally killing--- bleeding-- pass into scalder--- de-feathering hair after pass through the plucker --- manually eviscerating --- unloading the birds from shackle at last.
The shape of system can be designed according to the client building shape and size.
Poultry Compact Processing Line, Compact Abattoir, Compact Poultry Processing Line, Compact Slaughter Line,Full Automatic Porcessing Line,Poultry Conveyor Line
Connect Group For Poultry Project , https://www.connectpoultry.com