Sewage suction truck

The China Automotive Network Sewage Sewage Vehicles Catalog contains a total of seven categories of 115 manufacturers, 107 Sewage Cart brands, 838 Sewage Carts, and the latest Sewage Cart Bulletins, Environmental Notices. , fuel announcements, exemption announcements, pictures, news, and the most timely information on price quotes for sewer trucks.

Classified by brand:
Dongfeng 145 vacuum suction sewage truck
Dongfeng Shuangqiao Sewage Pump
The first four after the eighth sewage suction car
, Jiefang Sewage Cart, Futian Sewage Cart, Heavy Duty Suck Truck, Shaanxi Steam Suck Truck, JAC Sewage Cart
According to the appearance classification: single bridge suction sewage truck, double bridge sewage suction truck, flat suction truck, pointed suction truck, the first four after the eight sewage suction truck
Dongfeng Sewage Cart Category: Xiao Bawang Sewage Vehicle, Duolika Sewage Cart, Sanping Diesel Pump, 140 Sewage Cart, 145 Sewage Cart, 153 Sewage Cart, 1208 Sewage Cart.
Classification according to use: dump truck
Other categories: suction truck pictures, suction truck prices, suction truck functions, suction truck maintenance.


The special part of the function sewage suction truck is composed of power take-off device, drive shaft, vacuum sewage pump, pressure tank, hydraulic part, pipe network system, vacuum pressure gauge, scat window, hand-washing device, etc. It is equipped with high-power vacuum suction. Sewage pump and high-quality hydraulic system, one-time die-casting of the tank head, tank opening, and double top dumping. The dirt in the tank can be dumped directly through the rear cover, with a high degree of vacuum (more suction than a suction truck), large tonnage, high efficiency, and a wider range of uses.
Sewage car composition
Oil-water separator, water and gas separator, hydraulic self-unloading device, special vacuum suction pump, volume pressure gauge, pipe network system, suction pipe, gravity valve, vacuum tank, connected device (study window), automatic overflow prevention Valve, hydraulic kit.


Applicable scope Sewage suction trucks have the same principle as suction trucks, but they also have different uses with suction trucks. The difference lies in the fact that the sewage tank is a round tank and has a tighter structure and can withstand higher pressures to provide greater suction. Can be used to collect cleanup of transport sewage and sludge. Suitable for pumping, unloading and draining sludge in the sewer. Suction mud, silt, stones, bricks and other larger objects.


Sewage suction truck working principle Because the suction hose is always immersed in the liquid surface, the air in the fecal tank is sucked, and it becomes thinner and thinner because it cannot be supplemented. As a result, the pressure in the tank is lower than the atmospheric pressure. Under atmospheric pressure, the suction hose enters the tank. Or because the siphon tube is close to the bottom of the tank, when the air is continuously discharged into the manure tank, it is compressed because it has no way out. As a result, the pressure in the tank is higher than the atmospheric pressure. The manure fluid is discharged through the siphon tube and the suction hose under the action of the compressed air. Outside the tank.
Sewage suction vehicles have features such as high suction efficiency, self-priming, self-discharging, and direct irrigation. Filling the manure tank time: ≤ 5min, suction process: ≥ 8m. According to the characteristics of long service life, fast working speed, easy operation and convenient transportation.
The main purpose of sewage suction truck
Sewage suction trucks are mainly used to clean city sewers, pipeline sediments, dredging of dead mud, can also be used to clean industrial drainage pipelines, walls, etc., and can also be used for watering, transporting water and highways, and can be used for fire fighting in case of emergency. .
Purchase
1. Pay attention to the quality of the plate, the vacuum sealing degree, and the poor material can easily cause problems such as deformation of the tank body.
2. The choice of vacuum kit, the pressure capacity and the perception of temperature difference. The domestic kit debuts Veyron products.
3, After the choice of lid, according to the local operating environment, temperature and other choices.
4. According to the relevant regulations of the National Development and Reform Commission on the enforcement of the three-gas emission from the country, the National 2nd vehicle parameter data has been deleted since July 1, 2008. Please pay attention to identifying the country's 3 emissions labels and related procedures when purchasing vehicles.



User Manual 1. Preparation before Operation ( 1) The rear part of the sewage suction truck should be as close as possible to the operating point and parked.
(2) Pull the return oil tank's straight cock rotating handle to the angle of about 45° with the axis of the oil inlet pipe. Observe the oil inlet pipe and there should be lubricating oil flow.
(3) Open the side door of the walk-in box and take out the dirt-absorbing rubber hose so that it swings back without bending. 2. Suction work ( 1). Draw the dirt-contaminated hose as deep as possible to ensure that the end of the pipe is 300mm or less from the liquid surface during the work process.
(2) Push the four-way valve handle vertically to the ground.
(3). Hitch the transmission to neutral, then start the engine, disconnect the clutch, pull the power take-off switch backwards to pull the file, and the vacuum pump starts to run.
(4) Open the cabin tool box, pull out the alarm switch, and turn it on.
(5) The operator can pass through the observation mirror on the upper part of the rear head. When the liquid level reaches the middle of the observation mirror, the operator should be notified that the colleague should quickly pull the suction hose away from the ground or close the four-way valve. Under normal circumstances, the sounder will emit audible and visual signals at this time. When the driver receives the signal, the throttle should be reduced. The power take-off switch is pushed forward and the gear is removed. The vacuum pump stops moving and presses the switch to cut off the power. .
(6) Close the fuel tank straight cock rotating handle plate parallel to the axis of the incoming mailbox.
(7) After flushing the hose, place it back in the walkway box, close the side door, and position the boom over the cab.
(8) Close the anti-overflow valve so that the handle is perpendicular to the axis of the road.
(9) Drive the sewer truck away from the operating point. 3. Draining operation ( 1) Put the suction hose toward the storage tank.
(2) Pull the rear handle of the four-way valve parallel to the ground and open the spill-proof valve so that the handle and the pipe axis can be parallel.
(3) Hitch the transmission to neutral, then start the engine, disconnect the clutch, pull the power take-off switch backwards to pull the file, take the power, start the vacuum pump, put the transmission into neutral, then start the engine, disconnect the clutch, turn the power take off switch Pull backwards to pull the file, and the vacuum pump starts to operate.
(4) After the discharge of the liquid in the tank, the driver should push the power take-off handle forward and remove the gear, and the vacuum pump stops running.
(5) Close the fuel tank straight cock rotating handle plate and enter the axis of the e-mail box and close it. After the hose is rinsed, put it back into the walk-in box, close the side door, and make the suspender point towards the cab.
(6) Move the sewer truck away from the operating point. 5. Sewage suction truck price flat head single row cab, Yuchai engine, 6.50-16 tires
Euro III Emissions Yuchai Engine, Price 135,000 yuan [1]
European II North Korea diesel engine, the price of 102,000 yuan
Dongfeng Furika Sewage Suck Truck, Chaoyang Diesel Engine 95 hp, price 92,000 yuan


Precautions 1) Keep the number of rotations of the vacuum pump
Vacuum pump speed is too high, the rotor heating plus; the speed is too low, it will cause additional impact on the shipping machine, components, affecting life. In order to achieve a suitable working speed, please adjust the best position of the hand throttle in advance according to the pump type.
(2) Self-unloading cans on flat ground;
The unloading of the tank on an inclined road surface will cause distortion of the components and cause failures, and it may cause roll-over accidents.
(3) Open the tank after the unloading can open the tank door:
Before releasing the mud from the unloading tank, the locking bolt should be loosened and the rear tank door should be lifted to the required angle. When the tank is full, it is forbidden to lift the tank body with the rear tank door closed. Otherwise, there is a risk of overturning.
(4) When the oil pump and the vacuum pump take power, the engine idles and the clutch pedal is fully depressed. After the power take-off switch is turned on, slowly release the clutch pedal.
(5) The vacuum pump and the oil pump are stopped when the car is running.
(6) The vehicle must not inhale material larger than the diameter of the hose and transport waste oil and hazardous materials.
(7) Support rods and safety stops must be used when the unloading tank is lifted into the bottom of the tank or during overhaul.
(8) When transporting dirt, the vehicle must be driven at a moderate speed and at a slow speed, and no sharp turning or sudden braking should be allowed because the center of gravity of the anti-wave board is not high.


The main purpose of the sewage suction truck The sewage suction truck is mainly used to clean the city sewers, the pipeline sediments, the dredge of the dead mud, can also be used to clean industrial drainage pipelines, walls, etc., and can also be used for watering, transporting water and highways. It can be used to save fire in case of emergency. [2]
1. Preparation before operation (1) The rear part of the sewage suction truck should be as close as possible to the operating point and parked.
(2) Pull the return oil tank's straight cock rotating handle to the angle of about 45° with the axis of the oil inlet pipe. Observe the oil inlet pipe and there should be lubricating oil flow.
(3) Open the side door of the walk-in box and take out the dirt-absorbing rubber hose so that it swings back without bending.
2. Suction work (1). Draw the dirt-contaminated hose as deep as possible to ensure that the end of the pipe is 300mm or less from the liquid surface during the work process.
(2) Push the four-way valve handle vertically to the ground.
(3). Hitch the transmission to neutral, then start the engine, disconnect the clutch, pull the power take-off switch backwards to pull the file, and the vacuum pump starts to run.
(4) Open the cabin tool box, pull out the alarm switch, and turn it on.
(5) The operator can pass through the observation mirror on the upper part of the rear head. When the liquid level reaches the middle of the observation mirror, the operator should be notified that the colleague should quickly pull the suction hose away from the ground or close the four-way valve. Under normal circumstances, the sounder will emit audible and visual signals at this time. When the driver receives the signal, the throttle should be reduced. The power take-off switch is pushed forward and the gear is removed. The vacuum pump stops moving and presses the switch to cut off the power. .
(6) Close the fuel tank straight cock rotating handle plate parallel to the axis of the incoming mailbox.
(7) After flushing the hose, place it back in the walkway box, close the side door, and position the boom over the cab.
(8) Close the anti-overflow valve so that the handle is perpendicular to the axis of the road.
(9) Drive the sewer truck away from the operating point.
3. Draining operation (1) Put the suction hose toward the storage tank.
(2) Pull the rear handle of the four-way valve parallel to the ground and open the spill-proof valve so that the handle and the pipe axis can be parallel.
(3) Hitch the transmission to neutral, then start the engine, disconnect the clutch, pull the power take-off switch backwards to pull the file, take the power, start the vacuum pump, put the transmission into neutral, then start the engine, separate the clutch, and take the power. The switch pulls back and pulls the file, and the vacuum pump starts to operate.
(4) After the discharge of the liquid in the tank, the driver should push the power take-off handle forward and remove the gear, and the vacuum pump stops running.
(5) Close the fuel tank straight cock rotating handle plate and enter the axis of the e-mail box and close it. After the hose is rinsed, put it back into the walk-in box, close the side door, and make the suspender point towards the cab.
(6) Move the sewage suction truck away from the operation site


Sewage truck purchase 1, pay attention to the quality of the plate, vacuum sealing, poor material can easily cause deformation of the tank and other issues.
2. The choice of vacuum kit, the pressure capacity and the perception of temperature difference. The domestic kit debuts Veyron products.
3, the choice of the rear tank cover, according to the local operating environment, temperature and other choices.
4. According to the relevant provisions of the National Development and Reform Commission on the emission of the three-country exhaust gas from the enforcement country, all the country’s vehicle parameter data have been deleted since July 1, 2008. Please pay attention to identifying the country’s three emission labels and related procedures when purchasing vehicles.


Sewage suction car maintenance considerations one: a reasonable determination of the maintenance cycle
Scientifically determining the interval between various types of maintenance operations not only enables the car to maintain good technical conditions, but also enables you to save on maintenance and repair costs. New cars with good general automotive technology conditions can be properly prolonged and maintained when they are used under good operating conditions. However, if the condition of automotive technology is poor or the operating conditions are poor, the maintenance cycle should be appropriately shortened.
II: Make full use of free testing
Today's car manufacturers pay more and more attention to after-sales service, which brings the benefits for the owner is that they can often enjoy free testing activities. Many of these free testing activities appear to be simple and appear to the owner as having no substantive content. In fact, these free testing activities are very beneficial. Sewage vehicle owners can use these free testing activities to conduct a comprehensive physical examination of the car, discover potential failures in a timely manner, and eliminate these hidden troubles, eliminating the need for future high maintenance costs.
Three: As little as possible dismantling the maintenance assembly
Many owners have this feeling that an assembly of their own car will be out of control after the dismantling and maintenance, and it will be “inpatient” treatment after some time. In order to prevent the vehicle from entering the maintenance period too early, you may want to dismantle the maintenance assembly as little as possible and use various advanced maintenance equipment and means to carry out the maintenance-free operation of the vehicle. This will not only avoid damage to the vehicle assembly and components due to disassembly and maintenance. The unnecessary damage, but also greatly accelerate the speed of car maintenance, thereby reducing the total cost of maintenance.
Four: Appropriate use of oil
The proper use of oil includes two aspects: First, fuel, and second, lubricating oil. Improper use of fuel can easily cause malfunctions such as clogging of the fuel filter, causing idling instability, poor acceleration, and increased fuel consumption, as well as accelerated cylinder wear and engine life. How to use lubricating oil, so that it can meet the lubrication requirements, but also spend less money? The basic principle is: to meet the vehicle use requirements on the line, only to buy the right not to buy expensive. Such as engine oil, for domestic cars, some domestic SJ-class engine oil can fully meet the requirements, there is no need to buy imports. [3]

Hybrid Structure Prefabricated Buildings

SIPs, the latest approach in the housing industry & our main building system, can create a strong, durable and energy efficient building envelope in a very short time. A well-built SIPs homes can reduce annual energy cost by 50 percent or more which greatly cut down on carbon dioxide emissions. Prefabricated SIPs also save builders a significant amount of onsite labor and generate [0" waste. We have set up the first manufacturing line for SIPs in China & lead the SIPs industry. Our full automatic Light Gauge Steel equipment also enables us to provide LGS house.

Steel and Wooden Mixed Structure,Hybrid Prefab Villa,Modern Prefab Homes,Hybrid Structural Insulated Panels

Dalian Quacent New Building Materials Co.,Ltd. , https://www.quacenthomes.com