After the run-in period, the fuel consumption drops?
The running-in period is a concern for many new owners. The first three thousand kilometers of a car are well-grounded. The overall life and condition of the car is much better than that of a badly-running car. Some vehicle owners think that the fuel consumption during the break-in period is relatively high, because this idea is the front, and they don't care much about the high fuel consumption during the run-in period. It is hoped that the running-in period will be better.
This view is wrong, in fact, the running-in period should focus on fuel consumption, because according to the normal running-in rhythm, the most fuel-efficient driving style is generally the best way to run. For example, there is no emergency braking, no hurry to accelerate, these are the basic rules of green driving, but also driving requirements during the run-in period. It is natural that the fuel consumption will continue to be low in the future. If you feel that the running-in period has high fuel consumption, don't care, one is not conducive to the running-in of the vehicle, and the second is to develop a bad driving habit, and later the fuel consumption will not fall.
Indeed, after the break-in period, fuel consumption will actually decrease, but don't expect it to be too high. Generally, a 3 to 5% reduction is good. The best way is to develop good driving habits during the break-in period.
How to drive within the running-in period to save fuel?
1. Do not allow the engine to rotate at too high speed during use. Do not exceed 3,000 rpm in general, and do not exceed 3,500 rpm in automatic transmission.
2. It is not possible to keep a gear for a long time or drive for a long time in low gear. When all cars are traveling at low speeds, the actual burden is greater than that at medium speeds. Therefore, the running-in period should not be run at a speed of 60 kilometers per hour for a long time. Must gradually increase the speed. At the same time, if you have been running at a speed of 80 kilometers per hour after the running-in period, you will suddenly increase the speed, which will make the new car unfit, so you must gradually increase the maximum speed of the running-in period. Since an automatic transmission cannot be determined by running a gear shift manually, it can only be achieved by the speed of the vehicle.
In short, running at a uniform speed, 30km/h, 60km/h, 80km/h, 100km/h, this level must be stable.
3. The body cannot be overloaded. The lighter the better the car is during the run-in period of the new car, because the load is too heavy to damage the car.
4. Avoid driving too long. Many car owners put it down after they bought a new car. They always run it around day and night. In fact, this will accelerate the aging of parts and the harm to the new car is also quite large.
In fact, many owners who bought a new car will face this problem, that is, how to open a good car during the run-in period. Follow the normal rhythm of starting, refueling, shifting, after a long period of time can save a lot of fuel. If it is not necessary when driving on the road, then it is best not to overtake the vehicle more frequently. Driving at a constant speed can reduce fuel consumption.
Our company holds a powerful technical force and uses it for the development and manufacture of advanced covered-yarn machine series equipments, standing at the head of the domestic covered-yarn machine absolutely.
We produced covered-yarn machines include: all-computerized energy-saving type, computerized drive type and mechanical drive type three series and they are well sold all over the country and exported to several nations. The covered-yarn machine is able to produce both single-covering and double-covering which feature an extremely high performance and works to have the yarns of different natures as the cored wires, such as spandex, low stretch yarn, elastic ribbon, filament, metallic yarns and LVREX high stretch yarn; and have cotton yarn, synthetic fiber, polyamide, polyester, real silk and metallic yarns as the covering yarns. The produced finished have been widely used as the raw materials for making high stretch stockings, underclotches, gloves, elastic bands, fibrics and so on.
Covering Machine,Yarn Covering Machine,Doubling Covering Machine,Efficient Yarn Covering Machine
Xinchang Jinxing Machinery , https://www.xcjinxing.com