The top four rear six truck tanks play a more crucial role in the vehicle's heat dissipation and cooling performance. In high-temperature and continuous weather, the truck's water tank is also the most prone to failure. For example, water leakage, insufficient water level, corrosion of water tanks, etc. will cause the vehicle to turn on the boiler. In other words, the temperature of the vehicle tank is already It reached boiling point. When the temperature of the tank in the current four-fourth truck is already at the boiling point, the engine of the vehicle will be poorly cooled and the temperature is too high, causing the components of the first four rear six trucks to expand so that there is a gap between the various components. Too small, and in the case of excessive temperatures, will also make the viscosity of the oil lower. Therefore, under such conditions, the degree of wear between various parts will be even more serious, and even a relatively serious condition of damage to the machine will occur. So, if the temperature of the water tank in the first four rear six trucks has reached the boiling point, how should we solve this problem?
If during the driving process of the first four rear six trucks, some white water vapor suddenly appears in the hood of the vehicle, or if the pointer in the water temperature table suddenly rises up to the H mark, then It proved that the temperature of the first four rear six truck engines was too high at this time. This situation is generally caused by the fact that the water tank fan stops rotating, the water in the water tank is insufficient, or water leakage occurs, and it needs to be immediately disposed of.
1. The first step to be done is to immediately find a safe location to stop the first four rear six trucks. At this time, the engine can not be turned off, and it needs to be able to continue to dissipate heat under idle idle conditions. At this time, it can be patient Wait for a while, waiting for its natural cooling. For the current four-plus-six trucks, because the water temperature is too high and it is in the case of a pan, it is not possible to continue driving the vehicle while holding a lucky flair. This will result in a greater damage to the engine.
2, in order to avoid the liquid will not be burned by burning, can not try to open the lid of the tank; can not be the previous four after the six truck engine head and cylinder cooling water that can achieve cooling effect, in fact, This approach is very likely to cause the cylinder block burst due to instant quenching. Then after waiting for a while, continue to check whether there is water leakage under the first four rear six trucks, and wait until the indicator of the water temperature gauge is at a suitable temperature, then turn off the vehicle's engine. Then use a towel lid that has been soaked in cold water. After the first switch is turned on, it is probably a quarter turn. After the water vapor pressure inside is completely released, the water tank can be installed. Gaiwu An does not open
3, the next step is to check the amount of antifreeze in the tank and whether the liquid surface meets the standards, the fan belt can have abnormal conditions. If the amount of antifreeze is not enough, it only needs to be added to the high mark position. If the fan belt is broken and loose, it is best to call the trailer to help.
This kind of Drilling and Tufting Brush Machine is equipped with 2 drill heads and a hair planting head, human-machine touch screen control system, and optional Chinese or English language. The operation is flexible and convenient. The accessorie of the machine are all designed according to European standards. Two-color or single-color brush can be used in this machine.
Technical Parameters:
1. Weight: 1500kg
2. Planting method: Round wire
3. Production speed: 500 rpm
4. Planting peak: 65mm
5. Planting pore size: φ1.6-φ4.0
6. Storable procedures: 1000 models
7. X-axis travel: 400mm;
8. Y-axis travel: 320mm;
9. Z-axis travel: 160mm;
10. Air input pressure: 0.8MPa
11. Rated voltage frequency single phase: 220V, 50Hz
12. Machine power: 2.0kw
13. Machine dimensions: 1.14 meters long, 1.84 meters wide and 1.75 meters high
14. Packing size: 1.8 meters length, 2.1 meters width, 2.1 meters height (conforming to standard container requirements).
More details, please contact us as soon as possible.
4 Axes Drilling And Tufting Brush Machine
Brush Machine 4 Axis Flat Wire,4 Axis Round Wire Brush Machine,Flat Wire Brush Machine,4 Axis High Speed Brush Machine
Yangzhou Blue State Digital Control Brush Equipment Co., LTD. , https://www.lbbrushmachine.com