Haowo light truck 5 tons of national four fuel truck chassis configuration: 1880 middle body cab, the original Jiangxi Isuzu engine 109 horsepower! Wanliyang 6 files, 175 girders, moving, power, air brake, air brake, 700R16 steel wire tire, 120 aluminum alloy fuel tank, front axle 3.2, rear axle 6 tons, with the original German man front plate, ABS, speed limit! Transport medium: gasoline, density 700kg/m3, category number: 3; effective volume of tank: 5.2 cubic meters, maximum volume 6.2 square, tank dimensions (length × long axis × short axis) (mm): 1 refueling The machine side is mounted on the left or right side of the frame: 4000×1730×1100, and the 2 tanker is installed at the front of the tank: 4000×1800×1300 (the tank length is 800). The whole vehicle is weighed and not overloaded.
[Main technical parameters of Haowo light truck 5 tons national four fuel truck]
Product trademark Chusheng
Announcement Lot 275
Product Name CSC5077GJYZ type fuel truck
Product No. ZLSZX4WP01Z
Total mass (Kg) 7360
Tank volume (m3) 5.2
Rated load mass (Kg) 3470
Dimensions (mm) 5990×2050×2500
Curing quality (Kg) 3695
Cargo size (mm) × ×
Rated passenger (person)
Quasi-trailer total mass (Kg)
Number of passengers in the cab (person) 3
Load mass utilization factor
Approach angle / departure angle (°) 18/16
Front overhang / rear overhang (mm) 1160/1470
Number of axes 2
Wheelbase (mm) 3360
Axle load (Kg) 2450/4910
Maximum speed (Km/h) 80
Other 1, transport medium: gasoline, density 700kg / cubic meter, category number: 3; effective volume of the tank: 5.2 cubic meters, tank dimensions (length × long axis × short axis) (mm): 1 tanker side Installed on the left or right side of the frame: 4000 × 1730 × 1100, 2 tanker installed in the front of the tank: 4000 × 1800 × 1300 (the tank length 800). Fueling device model/manufacturing company: BL1111Z/Zhuhai Beiling Fueling Equipment Co., Ltd. Zhongshan Branch, HS1812B/Tokent Hengshan Technology (Guangzhou) Co., Ltd., SKES-1112/Shanghai Bolai Machinery Co., Ltd., SK20QF-111A, SK20QF- 222A/Zhengzhou Sanjin Petroleum Equipment Manufacturing Co., Ltd., CS20D1110F/Zhengxing Technology Co., Ltd., JSK-70B1121CZ/Sheng Enjia Lijia (Beijing) Petrochemical Equipment Co., Ltd. 2, the side protection is cold-formed steel / Q235, bolted. The rear protection is made of cold-formed steel/Q235, welded joint. The rear protective section has a height dimension of 320 mm, a section width dimension of 40 mm, and a lower edge height of 500 mm from the ground. 3, with the chassis optional cab, optional different color cab and tank spraying program; only the front disc brakes, speed limit device and radial tire chassis. Use only the chassis in front of the exhaust pipe. The car should be equipped with a tachograph with satellite positioning. The model of ABS system is XH-KQ4S4M-E01, and the manufacturer is Guangzhou Xihe Automotive Electronic Equipment Co., Ltd.
Dongfeng Dollyka 5 ton fuel truck chassis configuration: model DFA1070SJ20D5, Dongfeng Dolly card M series 1880 CM wide body cab, wheelbase 3300mm, Yuchai YC4FA115-40, 85kw115 horsepower with booster, 192 frame, front axle 2.2 rear axle 3.5 rear axle speed ratio 4.875, 7.00R16 steel wire tire, single row luxury driving can be turned, 24V circuit, power steering, air brake, air brake, clutch boost, 6-speed gearbox. According to national requirements: disc brake, speed limit device, ABS.
Dongfeng Dollyka 5 ton refueling car top loading configuration: effective volume of the tank: 5.3 cubic meters, tank dimensions (length × width × height) (mm): 4000 × 1730 × 1100 (the tanker is mounted on the left or right side of the frame The maximum volume of the side is 6.2 square), 4000×1800×1250 (the tanker is installed in the front of the tank, and the tanker is 800mm long and has a maximum volume of 5.6 square meters). The tank body is made of Wuhan Steel Co., Ltd. Q235 high-quality national standard 5mm carbon steel sheet, which is completely rolled and formed completely. The tank body is equipped with multiple anti-wave separators, which are tested by high-pressure gas leak test to make the tank body have strength. High, stable center of gravity, safe and stable vehicle carrying. The whole tank is divided into single or multiple warehouses. The warehouse can be divided into chambers. The lower part of the middle partition has through holes. Each compartment is welded with a sub-chamber to strengthen the wave partition to reduce the car. The impact of the oil in the tank during driving and the rigidity of the tank. The outer surface of the tank is coated with anti-rust paint and decorative paint. The tank and each bumper are affixed with red and white visual reflective strips, and the sides of the tank are affixed with "explosive" characters, according to the country. Requirements: Installation of subsea valves, emergency air shut valves, European standard tanks, anti-static devices, safety fences. Equipped with computer tax control tanker, automatic return reel, refueling gun, with power take-off, special oil pump, two equal length oil pipes, two small locks, two fire extinguishers, two plugs, one breathing valve, one fireproof Cap, both sides and rear reinforced bumper, non-slip ladder. The whole vehicle is issued with chassis certificate, vehicle certificate, tank inspection report, product quality certificate, national unified motor vehicle invoice, on-board tool, vehicle warranty manual, national Service station list, etc.
[Main technical parameters of Dongfeng Dollyka 5 tons fuel truck]
Product trademark Chusheng
Announcement Lot 275
Product Name CSC5071GJY4 Fuel Truck
Product No. ZKSVE4WP04X
Total mass (Kg) 7350
Tank volume (m3) 5.3
Rated load mass (Kg) 3535, 3600
Dimensions (mm) 5990×2050×2500
Curing quality (Kg) 3620
Cargo size (mm) × ×
Rated passenger (person)
Quasi-trailer total mass (Kg)
Number of passengers in the cab (person) 3,2
Load mass utilization factor
Approach angle / departure angle (°) 27/21
Front overhang / rear overhang (mm) 1115/1575
Number of axes 2
Wheelbase (mm) 3300
Axial load (Kg) 2940/4410
Maximum speed (Km/h) 80
Other transport media: gasoline, density: 700 kg / cubic meter, category number: 3; effective volume of the tank: 5.3 cubic meters, tank dimensions (length × width × height) (mm): 4000 × 1730 × 1100 ( The tanker is mounted on the left or right side of the frame, 4000×1800×1250 (the tanker is installed in the front of the tank, and the tanker is 800mm long). The side protection is made of cold-formed steel / Q235B, bolted. The rear protection is made of cold-formed steel/Q235B, welded, with a section height of 220mm, a section width of 50mm, and a lower edge of 550mm from the ground. Refueling device model and manufacturer: BL1111Z/Zhuhai Beiling Fueling Equipment Co., Ltd. Zhongshan Branch, HS1812B/Tokeng Hengshan Technology (Guangzhou) Co., Ltd., SKES-1112/Shanghai Bolai Machinery Co., Ltd., SK20QF-111A, SK20QF- 222A/Zhengzhou Sanjin Petroleum Equipment Manufacturing Co., Ltd., CS20D1110F/Zhengxing Technology Co., Ltd., JSK-70B1121CZ/Sheng Enjia Lijia (Beijing) Petrochemical Equipment Co., Ltd. Optional cab with chassis; optional rear structure; only use radial tire, speed limit device, auxiliary brake and front disc brake chassis; the car is equipped with a satellite positioning function of the tachograph; ABS model / manufacturer: 36BG13-30010/Dongfeng Electronic Technology Co., Ltd. Automotive Brake Systems. (This article comes from Xiagong Chusheng)
CNC machine LED Work Lamp
1. Adopting high-brightness LED as the light source, Sercive 10,0000 hours, with heat small, energy saving.
2. Dust-proof, moisture resistance, corrosion resistance.
3. Can be install on CNC machine, and widely used in procesing center, products testing center, various types of ventilation, electric control cabinet repair operation, commodity display, exhibition and other places, meet wet acid-base, dust environment security lighting.
Led Work Lamp,Handheld Led Work Lamp,Rechargeable Led Work Light,Portable Led Work Lights
Cangzhou Dongjun Machinery Accessories Co., Ltd. , https://www.cablechainfactory.com