On June 5, Dongfeng Motor Co., Ltd. officially launched its first “Social Responsibility Month†at Dongfeng Company headquarters to further enrich the social responsibility work carrier, create a strong atmosphere of accountability, and improve the implementation performance of the “Run†program. Environmental responsibility is one of the five major responsibility sections of Dongfeng's “Run†program. New progress in the implementation of the responsibility and new breakthroughs have also become the focus of the display during the period of social responsibility. To this end, the reporter visited the Dongfeng headquarters to understand Dongfeng environmental protection concepts and management methods, and went deep into the Shiyan area to visit the green factory demonstration site and the industrial sewage centralized treatment project, and witnessed the Dongfeng company's green full value chain environmental protection system.
The New Environment of Innovation, Responsibility and Responsibility, and the Construction of Green Environmental Protection System
In recent years, Dongfeng Company has made unremitting efforts to continuously strengthen its capacity for energy conservation and environmental protection work. The transition from a single point-to-face result management to a full-value chain full-process management has been achieved; the shift from traditional single-unit management to regional collaborative management has been achieved.
Xia Xiaochuan, deputy director of Dongfeng Corporation’s management department, told reporters: “In June 2013, the company released the energy conservation and environmental protection work concept of “Energy-saving and environmentally friendly vehicles for building energy-saving and environmentally-friendly cars†and “Dongfeng Motor Company's mid-term business plan for energy saving and environmental protection (2013). -2016), established an energy conservation and environmental protection management system with Dongfeng characteristics, namely: business planning system, regulatory system, management and control system, monitoring system, target evaluation system and information exchange platform. "5+1" energy saving and environmental protection The management system has laid a solid foundation for the effective development of energy conservation and environmental protection."
Dongfeng Company insists on integrating energy conservation and environmental protection into all aspects of production and operation of enterprises. On the one hand, it establishes basic management models, standardizes basic management, and integrates actual management innovation. On the other hand, it actively conducts research and application of new technologies and promotes scientific and technological progress. Take practical actions to practice the entire value chain environmental protection system.
According to statistics, compared with 2012, Dongfeng Energy's 10,000-yuan increase in energy consumption decreased by 19.87%, while COD and SO2 reduced emissions by 3.45% and 18.35%, respectively, achieving phased goals and annual targets. In the development of new energy vehicles, Dongfeng has also made considerable progress. “As of now, Dongfeng Motor Company has a total of 43 products that have entered the National Catalogue of Recommended Models for the Promotion, Application and Promotion of Energy-Saving and New Energy Vehicles, and have carried out demonstration operations in cities such as Wuhan, Shenyang, Guangzhou, Zhengzhou and Dalian.†Huang Zhaoqin, Director of New Energy Vehicle Business Platform, Dongfeng Motor Company said.
Entering Shiyan to experience Dongfeng’s green manufacturing system On the morning of June 6, the reporter walked into the joint plant of Dongfeng Commercial Vehicle and saw that in a clean and tidy workshop, the workers were concentrating on the work at hand, not because of the reporter’s visit. affected.
During the interview, the reporter found that the Dongfeng Commercial Vehicle Complex was not only a factory building but even the entire park. International advanced solar energy technologies, roof green belts and other comprehensive environmental protection technologies have all been applied in new factories. It is understood that the Dongfeng Commercial Complex Plant is the first BIPV BIPV demonstration project for energy efficiency in the integration of Dongfeng Motor Co., Ltd. The reporter also noticed that glass curtain walls and windows on the factory buildings all use “brown glassâ€â€”photovoltaic panels—that can use solar energy to provide power lighting for inspection workshops, with power up to 15KW, and can fully satisfy the natural lighting of the building’s roof windows. This fully demonstrates the energy conservation and environmental protection concept of Dongfeng Motor Co., Ltd.'s "Energy-saving and environmentally-friendly vehicle-building and energy-saving and environmentally friendly vehicles."
The relevant person in charge of Dongfeng Company stated: "Dongfeng Commercial Vehicle Co., Ltd. has continuously launched green products and actively carried out green manufacturing while it is committed to building a green factory. Take Dongfeng Commercial Vehicle's strategic product Dongfeng New Tianlong Heavy Truck as an example. New Tianlong is based on The 'ECOLIVE' concept of green ecology has undergone a comprehensive product upgrade. The matched dci11 engine has been fully electronically controlled, embodying a new concept of development and design. With its abundant power, it has ultra-low fuel consumption and a minimum fuel consumption rate of only 190g. kwIII·h has created the lowest domestic record.In addition, Dongfeng New Tianlong also adopts new materials, new structural technologies and lightweight design to reduce the weight of the entire vehicle and improve the efficiency of transportation under the condition of weight-loading fees. Users provide 'green products' with excellent value.
Centralized treatment of industrial wastewater, natural environment, clear water
As an important water source for the Middle Route Project of the South-to-North Water Diversion Project, the purification and treatment of industrial sewage in the Shiyan District is not only of great significance to the residents of Shiyan District, but also an important guarantee for ensuring that “a clean water is sent to Beijingâ€. Therefore, Dongfeng Company uses the Shiyan Xicheng Industrial Park as a demonstration. At the same time, we actively explored the management innovation model for centralized management of industrial wastewater: We will fully utilize scale, technology, cost, and professional advantages. The wastewater treatment business will be unified by the units that have the qualification for wastewater treatment, and wastewater treatment in the park will be “scaled and intensifiedâ€. , marketization, and specialization."
On the afternoon of June 6, the reporter came to the Xicheng Industrial Park to inspect. The project has completed the first phase of the first phase of the project and is currently in the water commissioning phase. With the project completed and put into production, Shiyan Xicheng Industrial Park will become the first circular economy demonstration park in the automobile industry in China. By realizing the reuse of water, it will not only save more than 3 million tons of fresh water annually, but also share regional water environment capacity. According to the pressure, in accordance with the treatment of 1.25 million tons of waste water after the date of production, it will be possible to reduce CODcr by more than 1,000 tons per year, drastically reduce the discharge of pollutants, and provide a clean water environment.
According to relevant person in charge of Dongfeng Company, during the “12th Five-Year Plan†period, Dongfeng Motor Company will have 15 factories and subsidiaries to settle in Shiyan New Industrial Zone. In order to ensure the safety of water quality, Dongfeng Motor Company has explicitly requested that units that have settled in the Shiyan Industrial New Area must realize the reuse of recycled water and strive to achieve “zero emissionsâ€. In order to improve the treatment of waste water, the company decided to implement centralized treatment of industrial waste water and water reuse projects in the Shiyan Industrial New Area, and established the overall construction of “separate collection, centralized management, primary planning, step-by-step implementation, and reuse of reclaimed waterâ€. Planning and drawing on the advanced experience at home and abroad, we selected the mature DAT-IAT biochemical treatment process in the machining industry.
The relevant person in charge of Dongfeng Company stated: “The centralized treatment of industrial wastewater in the Shiyan Industrial New Area will result in intensive and large-scale effects, avoiding the problems of multiple points and investment duplication caused by the self-built wastewater treatment facilities of each unit. It provides a reference for wastewater treatment of the same type or similar type of park.â€
Dongfeng has always been committed to the green development of the entire value chain, vigorously promote the construction of green factories, production of green products, strengthen green procurement, and build green sales, and practice the practice of “making cars that save energy and protect the environment and create energy-saving and environmentally friendly vehicles.†Energy saving and environmental protection concept. With the success of Dongfeng's "Social Responsibility Month" event, this concept will surely make the idea more deeply rooted.
Stainless Steel Sheet Metal CNC Laser Cutting Parts
(1) It is used as a variety of industrial metal parts that like electronic component, auto spare parts,
home appliance, industrial equipment...etc.Material based on SPCC and SGCC, stainless steel, aluminum alloy5052, 6063, 6061, Stainless steel 304, 316, 201, carbon steel,etc.
(2) Software for specification drawings: Pro/E, Auto CAD, PDF, IGES/IGS, STP/STEPS, X_T, DXF etc..
(3) High precision as following: Carbon steel: 0.5mm~16mm,Stainless steel: 1mm~8mm,Aluminum alloy: 1mm~8mm,Brass: 1mm~4mm.
Accuracy: positioning accuracy: ±0.03mm, Repeated positioning accuracy: ±0.02mm
(4) Main poduction machine: Laser Cutting Machine, CNC punching machine, welder, CNC bending machine
(5) Surface treatment: Polishing, grinding, gavanized, powder coating, nickel, zinc, chrome, silver, gold plating etc.
(6) For packing: A variety of packing methods can be used according to customers' requirement, such as carton , wood box, wood crate and pallet etc.
Stainless Steel Laser Cutting,Custom Laser Cutting,Cnc Laser Cutting Machine,Laser Cutting Machine
Nanpi Jian Tong Hardware Manufacturing Co., Ltd. , http://www.sheetmetals.nl