This Bluetooth long-distance parking system was researched and conducted by Guangzhou Coma Traffic Technology Co., Ltd., and combined with the successful experience of the past construction of the parking system. Based on the design principles of stability, advancement, and simplicity, the program was designed to implement the vehicle. In and out of management. Once the system design is completed, a long-distance automatic reading of the cartoon line is used. The reader automatically opens the barrier, and the vehicle sensor detects that the vehicle has passed and the railing automatically falls.
First, technical parameters
1, Model: QD801
2, the scope of work: reading card distance 3-30 meters adjustable, 60 ° orientation card reader
3, working mode: light incentive positioning, CDMA Bluetooth communication, sleep wake up
4ã€Working power: DC12V-18V
5, 4A adapter: AC110~220V/DC+12V
6, Bluetooth power: 12V
7, operating frequency: 433MHZ
8, infrared frequency: 38KHZ
9, the maximum reading distance: ≤ 40 meters
10, the label agreement: CDMA
11, the working temperature: -30 °C ~ +75 °C
12, relative humidity: maximum 95%
13, Weight: 13KG
Second, the Bluetooth long-distance parking system has the following advantages:
1. This product is a high-tech crystallization of optical excitation, CDMA, dormancy wake-up, Bluetooth communication, fast reading speed, long distance reading, good directionality, and readable card distance controllable (3-30 meters adjustable), 10 - Card readers can stop at 30 km/h.
2, read and write cards on the up and down ramps, corner entrances and exits, to avoid the vehicle stalled, start the slope. It is especially suitable for beginners who are just learning to avoid the danger of slipping.
3, strong penetration, not affected by vehicle protective film (such as anti-riot film), apply to all vehicles.
4, no parking, no window readers, bad weather owners are no longer affected by wind, snow and snow outside the window.
5, no parking card readers, with the use of rapid barriers, greatly increasing the vehicle circulation, traffic congestion no longer occurs in the peak period of traffic phenomenon. With incomplete statistics, due to parking card (brake, queuing, refueling) daily fuel consumption is about 1 yuan more than normal traffic, the province can save 360 ​​yuan for the owners of gasoline.
6. There is no mutual interference between readers (using advanced Bluetooth communication technology and code division multiple access), which has good directionality and effectively solves the problem of mutual interference between the front and rear lanes.
7, 433MHZ frequency, in line with environmental protection requirements, no radiation damage to people.
8, card stability, product anti-jamming, anti-fading ability, without interference from other communications products (such as: mobile phones and other wireless communications products).
9, Wiegand 26/34, RS232/485 adapting interface, with good scalability can be common in other parking lots, highways, long-distance identification.
10. The parking lot can be divided into multiple zones, allowing different numbers of Bluetooth cards to enter.
11, to enhance the community image, so that your property management is different.
12. High stability: adapt to various environments, free from climate impact, and achieve 100% accessibility.
Third, intelligent Bluetooth remote management
system design
Long-distance non-stop card reader system: Long-distance non-stop readers are used for fixed vehicle management to facilitate internal and external vehicles to enter and exit quickly and safely.
1. Entrance section:
The entrance part is mainly composed of an integrated long-distance card reader, an entrance card reader, a barrier gate, a vehicle detector, and a sense coil device.
The admission process is designed as follows:
When a fixed vehicle enters the parking lot, the long-distance electronic tag (month card) is adsorbed on the front windshield of the car. When the car travels to the card reader area of ​​the Bluetooth card reader, the card reader automatically reads the card data and judges that it is valid. If it is valid, the electric railings will release the vehicle from the bar and the car will automatically put down the rails after passing through the detection coils under the barrier; if it is not valid, it will not be allowed to enter the field.
2. Export section:
The export part is mainly composed of an integrated long-distance card reader, an exit reader ticket box, a barrier gate, a vehicle detector, and a sense coil device.
The appearance process is designed as follows:
When a fixed vehicle exits the parking lot, the long-distance electronic tag (month card) is adsorbed on the front windshield of the car. When the car travels to the card reader area of ​​the Bluetooth card reader, the card reader automatically reads the card data and judges Effectiveness; If valid, the barriers will be lifted to allow the vehicle to be released. After the vehicle sensor detects the passage of the vehicle, the railing will automatically fall; if it is invalid, it will not be released.
Kema Traffic Technology Co., Ltd. is a hi-tech enterprise specialized in the research, development, design, manufacture, sales, and service of smart card, parking lot equipment, electromechanical equipment, transportation facilities, patrol system, and intelligent and security series products. Its smart parking brand has "Blaring Intelligence" and "", is the top ten smart parking brand in China.
Coma Transportation Technology Co., Ltd. has more than 10 years of technical experience and team strength, has provided comprehensive intelligent parking solutions and technical support for domestic and foreign. Each series of systems has obtained national patent certificates and has been widely used in government, units, schools, hospitals, offices, shopping malls, scenic spots, squares, parks, ports, docks, airports and other places in most cities across the country.
The article was originally created in Guangzhou Kema Traffic Technology Co., Ltd., please reprint the original source
Parameters of the production line:
Dripper transferring systerm: 1 set
Automatic material feeding and drying systerm: 1 set
SJ-75/30 Single Screw Extruder: 1 set
Mold(the durable filter is included) 1 set
Vacuum water tank: 1 set
Cooling water tank: 1 set
Tractor: 2 set
Punching system: 1 set
Winding machine: 1 set
Electric cabinet: 1 set
Main technical parameters:
Production speed: 1-120M/MIN
Power for dripper transfer system: 60W
Speed for dripper transfer system: 400PCS/MIN
Punching speed: 400PCS/MIN
Water dripping space: 100MM-2000MM(adjustable)
Water dripping volume: 1.2-3.8L/H(adjustable)
Specification for tape: 0.2-0.6MM(adjustable)
Material: LDPE/HDPE
Overall dimension: 30M*2.5M*3M
Total weight: 6000KG
Flat Emitter Drip Irrigation Type Making Machine
Flat Dripper Pipe Production Line,Flat Emitter Drip Irrigation,Flat Emitter Drip Irrigation Machine,Flat Drip Irrigation Pipe Making Machine
KonRun Extrusion Machinery Technology (Ningbo) Co., Ltd. , https://www.konrunmachine.com