The plastic low-temperature embrittlement tester is widely used. It adopts internationally superior design, surface spray treatment, and a high-quality appearance. It also uses a non-reactive handle and is easy to operate. It has been well received by users. So how can the plastic low temperature embrittlement tester effectively remove dust?
First of all, to keep the inside and outside of the test cabinet clean, all internal impurities should be removed before the operation. The power distribution room should also be cleaned more than once a year. When cleaning, vacuum cleaners can be used to remove dust from the interior. The exterior of the cabinet should also be cleaned more than once a year, and should be wiped with soapy water first.
Then you need to check the tester. Remember to check the over-temperature protector of the test box. The water in the humidifier should be changed every month to ensure the clean water. The humidifying plate should also be cleaned once a month. To ensure smooth water flow.
Finally, it is the maintenance of the test chamber. The condenser must be remembered for regular monthly maintenance. The dust attached to the condenser heat-dissipating mesh is sucked by a vacuum cleaner.
Face roller Veneer Dryer machine is one of the roller veneer dryers . Face veneer dryer machine quality requirements are more higher than normal roller veneer dryer . The material is stainless steel , and the distance between two rollers is 140mm . the face veneer can be 0.3mm thinnest.
Drying Line,Face Veneer Dryer,Thin Veneer Dryer,Face Veneer Dryer Machine
Shandong Shine Machinery Co.,Ltd , https://www.woodmachine.nl