Whether the seams of wall fabrics are obvious or not, wall covering manufacturers depend largely on the material of the wall coverings themselves. Most jacquard and embroidered wall coverings on the market today have loose yarns at the warp and weft, so the joints cut the yarns to spread out. The raw edges of the clothes will look very obvious because of the high precision weaving base fabric, fine yarns, and neat seams that are not easy to burn, so you can hardly see the joints without careful inspection. In addition, the wall fabrics are connected. The seams are usually arranged in the dark corners of the room, even if the seams are not vertical because the seams will not affect the appearance and service life.
When the wall cloth is attached, it is brushed with glutinous rice gum at the back, and then it is wall cloth on the wall. If the edges are curled up, the wall fabric manufacturer can make a glutinous rice glue in the place where the edges are curled, and the burr of the wall cloth can be glued with transparent glass glue, and the effect is good.
Then, if the incision is fluffy, how can we remedy it?
The first thing to do is to figure out whether it is during the construction process that the edges of the joints are burrs or the edges of the wall after a long time have been covered. If the cause is identified, you can prescribe the right medicine.
1. If during the construction process the joints are burrs, we must re-edge the cuts, flatten it with the pressure roller, or flatten it with the hand board; the construction of the wall cloth manufacturers is not recommended to cut off the wall sun corner without the edge trim.
2. If the edges are cut off because of the angle of the sun, you can use 502 glue, or make up the edge of the rubber, and the wall fabric manufacturers will use the glue on the wall to straighten out the edges.
In addition, there is a kind of wooden molding line called wood line. Wall covering manufacturers mainly worry about the wall covering after a certain period of time. The edge glue hardens and rolls up, so most designers will add a frame around the wall covering. The material is useful for wood and stainless steel. Batten, press the perimeter. Also known as fillet line, cover line, edge line, and so on. It is the easiest and most effective method to use lines when connecting with the floor or the ceiling.
Edge method: solid wood white oil paint or latex paint with the same wall. Closes the mouth, highlights the line, the oil original wood color, increases the color, a shape frame, the stainless steel edge closes, the fashion is generous, the Dali three stone beading handles, the noble shape. Wall fabric manufacturers can not only play a fixed role, but also can make a natural transition between color and material, so that the decoration to achieve another sense of beauty.
We started to manufacture traffic signal pole from 2001 and exported from 2002.
Our firm introduced whole set of good-sized numerical control hydraulic folding equipment(1280/16000) as well as equipped with a series of good-sized professional equipments of armor plate-flatted machine, lengthways cut machine, numerical control cut machine, auto-closed up machine, auto-arc-weld machine, hydraulic redressing straight machine, etc. The firm produces all sorts of conical, pyramidal, cylindrical steel poles with production range of dia 50mm-2250mm, thickness 1mm-25mm, once taking shape 16000mm long, and large-scale steel components. The firm also is equipped with a multicolor-spayed pipelining. At the meantime, for better service to the clients, our firm founded a branch com. The Yixing Jinlei Lighting Installation Com, which offers clients a succession of service from design to manufacture and fixing.
Traffic Signal Mast,Traffic Signal Light, Camera Pole,Traffic Signal Lighting
Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.steel-pole.com