SUNDI Series Advantage
- Working temperatures from -120ºC to +350ºC;
- Intelligent temperature control;
- Maximum process stability and reproducibility;
- Adop plate heat exchager,pipeline heating, the fastest heating and cooling rates;
- High cooling power from 0.5 to 1200KW;
- Large temperature range without fluid change;
- Closed system, extend thermal fluid lifetime;
- Comprehensive warning and safety functions;
- Rapid cooling down from high temperature (from 300ºC);
- Use magnetic drive pump, solve the circulation pump leakage
Product DescriptionÂ
| Model | SUNDI-8A15W | |
| Temperature range | -80ºC~250ºC | |
| Control Mode | Feedback PID + Our special dynamic control calculation, PLC controller | |
| Temp.control | Option:Process temperature control mode or jacket oil temperature control | |
| Temp. difference | Set or control the temperature difference between jacket oil and raw material process | |
| Program Editor | 20 programs, each program can edit 45 steps. | |
| Communication Portocol | MODBUS RTU Protocol,RS485 interface | |
| Temp. feedback | The temperature of four points: the inlet and outlet of heat-conducting medium, heater and material in reactor(External temperature sensor) |
|
| Temp. accuracy | ±1ºC | |
| Heating power | 15kw | |
| Cooling capacity | 250ºC | 15kw |
| 100ºC | 15kw | |
| 20ºC | 15kw | |
| 0ºC | 15kw | |
| -20ºC | 14kw | |
| -40ºC | 11kw | |
| -60ºC | 5.8kw | |
| -75ºC | 2.4kw | |
| Circulation pump | Max75L/min 1.5bar | |
| Compressor | Dorin semi-hermetic | |
| Expansion valve | Danfoss | |
| Oil separator | Emerson | |
| Evaporator | KAORI plate heat exchanger | |
| Operation Panel | 7-inch color touch screen controller, temperature curve record, data export to Excel format |
|
| Safety protection | Self-diagnosis function; freezer overload protection; high pressure switch, overload relay, thermal protection device, liquid low level protection, high temperature protection and temperature fault protection. |
|
| Closed circulation system | The whole system is full closed circulation, there is no oil mist at high temperature and no water vapor at low temperature, pressure do not rise up when system is running. The system will supply oil automatically at low temperature. |
|
| Refrigerant | R-404AÂ R23Â | |
| Connection size | DN25 or M24*1.5 | |
| Water-cooled type W (cooling water@20ºC) |
4500L/HÂ 1.5bar~4bar | |
| Dimension(mm) | water-cooled | 1000*950*1750 |
| Weight | water-cooled | 750kg |
| Power | ACÂ 380VÂ 50HZÂ 33kw(Max) | |
| Case material | SUS 304 | |
| Optional | Optional Ethernet interface, configure the computer operating software | |
| Optional | Optional outside touch screen display controller(separated),the communication line distance is 10 meter. |
|
| Optional Power | 220V 60HZ three-phase, 440V~460V 60HZ three phase | |
A crane mounted on a truck carrier provides the mobility for this type of crane. This crane has two parts: the carrier, often referred to as the Lower, and the lifting component which includes the boom, referred to as the Upper. These are mated together through a turntable, allowing the upper to swing from side to side. These modern hydraulic truck cranes are usually single-engine machines, with the same engine powering the undercarriage and the crane. The upper is usually powered via hydraulics run through the turntable from the pump mounted on the lower. In older model designs of hydraulic truck cranes, there were two engines. One in the lower pulled the crane down the road and ran a hydraulic pump for the outriggers and jacks. The one in the upper ran the upper through a hydraulic pump of its own.
Features of Truck Mounted Crane
1. The chassis is purchased from some domestic famous companies, such as China Dongfeng Automobile Company, China Dongfeng Motor Limited Company, China Dongfeng Automobile Limited Liability Company, FAW Jiefang, Sino Truck, Beiqi Foton Motor, Hualing Heavy-duty Truck, Northern Benz, Shaanxi Automobile, Jianghuai Automobile, and Jiangling Motors.
2. Advanced hydraulic pump system is adopted to enable our truck mounted crane to have properties of energy saving, high lift speed and high working efficiency.
3. It is designed with H-shaped outriggers with long span length. Each single outrigger can be adjusted.
4. Our truck mounted crane can be operated bidirectionally. It can rotate continuously, and can complete a 360 spin in clockwise or counterclockwise direction. The rotating speed and lift speed can be adjusted through manual accelerator.
5. The truck mounted crane can be equipped with cranes whose weight could be 1t, 2t, 3.2t, 5t, 6.3t, 8t, 10t, 12t, and 16t. Its arms could be retractable type or folding type, and can be designed to be two-section arms, three-section arms, and four-section arms.
6. It has properties of high power, fast speed, strong climbing capacity, high lift height, high working efficiency, and easy operation.
Performance of Truck Mounted Crane
Our truck mounted crane can be operated bidirectionally. It can rotate continuously, and can complete a 360 spin in clockwise or counterclockwise direction. The rotating speed and lift speed can be adjusted through manual accelerator.
Applications of Truck Mounted Crane
The truck mounted crane can do lifting work in fields, stations, ports, warehouses, building sites, factories, oil fields, and more.
Truck Crane,Mobile Crane,Truck Mounted Crane,Boom Truck,Crane Trucks
Hubei Jiangnan Special Automobile Co. Ltd. , http://www.jttrucks.com