Increased construction waste, prospects for mobile crushers

Increased construction waste, prospects for mobile crushers The pace of the implementation of the demolition of the old city, the transformation of the village in the city, and the demolition of the illegal construction of the city have been accelerated, making our city more and more beautiful. But at the same time, the amount of construction waste generated is also increasing.

At present, the amount of construction waste in China has accounted for 30%-40% of the total municipal waste. Based on the standard of 500-600 tons/10,000 square meters, by 2020, China will have a new construction area of ​​about 30 billion square meters. The newly-generated construction waste will be an impressive figure. In Beijing, 10 million tons of construction waste is removed each year. The huge construction waste not only affects the appearance of the city, but also imposes a heavy load on resources and the environment.

In fact, construction waste is not real rubbish, but is the “golden” misplaced. Most of the construction waste can be reused as a renewable resource after sorting, removing or crushing it. According to relevant data, the total amount of construction waste that can be used in the total amount of construction waste is about 800 million tons. How can we “turn waste into treasure”?

In recent years, with the continuous innovation of science and technology, China's mobile crushing plant can effectively treat and reuse construction waste, and it is the best equipment for scientific treatment of construction waste.

Mobile crushing station is mainly used for metallurgy, chemical industry, building materials, hydropower and other materials processing that often require relocation operations, especially for the operation of mobile stone materials such as highways, railways, hydropower projects, etc. Users can use the type of processing materials, scale The different requirements for finished materials and the use of a variety of configurations.

The mobile crusher is a new type of environmentally-friendly crusher with stable output and higher efficiency. It can crush and sieve bricks, tiles, stone, concrete, waste steel, etc. at the site and convert it into recycled aggregates, which can be used for foundation reinforcement, road engineering cushions, bricks, paving slabs, and unburned bricks. Tooth tiles, etc., in order to achieve "turning waste into treasure."

The mobile crusher is favored, but also because it has the following advantages:

1. Integrate the whole set of units to reduce the consumption of materials and working hours;

2, can be broken on the spot, reduce material transportation costs;

3, flexible mobility, provides more flexible space and reasonable layout for the overall crushing process;

4. Flexible and flexible configuration, which can be operated independently by a single unit, and can also be configured flexibly to configure the unit's joint operation; 5. The operation is effective and the cost can be reduced to the maximum;

6, mobile crusher reliable performance, easy maintenance.

The application of mobile crushing station in the disposal of construction waste has given birth to the project of green digestion and recycling of construction waste in situ, which has resulted in a conversion rate of construction waste of more than 90%.

In the Netherlands, 70% of construction waste is currently recycled, but the Dutch government is still working hard to increase this percentage to 90%. In recent years, China's urban management department has also treated the disposal of construction waste as a major issue for people's livelihood, strengthened the management of urban construction waste, ensured the city appearance and environmental sanitation, and introduced some measures in succession, such as the implementation of the "June 1st, 2005". Urban Construction Waste Management Regulations.

Therefore, for the vast majority of mobile crusher manufacturers, whether it is a significant increase in market demand or the active promotion of government policies, mobile crushers will face a good and broad development prospects.

Straightening Machine is used for thicker plates(1.5*1300mm), it is a separate leveling machine.

European standard, cut to length with slit both, and we have exported to Europe.


Specifications:

1. Work for material thickess:0.3-1.5mm
2. Main power:5.5KW(hydraulic motor)
3. Speed:10-15m/min
4. Straightening rollers:4+5.
5. Shaft Material and diameter
    material is #45 heat treatment
6. Blade material:GCr12
7. Power:415V/50HZ/3 Phase
8. Manual decoiler for 5T.
9. PLC system fix with the machine


Pictures for machine:

Straightening machine

Straightening machine

Straightening machine

Straightening machine

Straightening machine



Training and Installation :
1. We offer installation service local in paid, reasonable charge. 
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation. 


Certification and after service:

1. Match the technology standard, ISO producing certification 
2. CE certification 
3. 12 months warranty since the delivery. Board. 



Our advantages:

1. Short delivery period. 
2. Effective communication 
3. Interface customized. 

Straightening Machine

Straightening Machine,Straightening Machine Roll Type,Steel Rod Automatic Straightening Machine,Wire Straightening Machine

YingYee Machinery and Technology Service Co.,Ltd , http://www.yingyee.cn