Marine diesel generator daily maintenance and maintenance?

Marine diesel generator daily maintenance and maintenance?
Diesel Generator | Diesel Generator Price / 2013-06-27

Do not know how much you know about daily maintenance and repair of diesel engine units ? This is very important for consumers. Here's how to maintain and maintain them:
Marine 50Hz or 60Hz alternators are mostly three-phase synchronous generators. Generators can be divided into gas generators, turbo-generators and diesel generators. In some large ships and some ships, turbine generators or gas turbine generators are used. General ships use medium-speed diesel generators. Other ships use low-speed shaft generators, mostly medium-sized capacity.
　　
General maintenance:
     To ensure the normal operation of the generator, there should be no water, oil and dirt accumulation near it, and no corrosive gas, so as not to damage the generator winding insulation.
While preventing moisture and dust, be careful not to affect the normal ventilation cooling of the generator. Always clean the dust and dirt inside the ventilation holes to keep them open. The temperature of the cooling air must not be so low as to prevent condensation on the windings and other conductive components.
For generators that have been temporarily stopped for any reason, the slip ring may not need to be bandaged, but it must be covered with insulating cardboard, wax paper, or tar paper between the brushes and the slip ring so as not to brush the surface of the slip ring. Formed spots.
The machining surface of marine diesel generator sets shall be rust-removed and painted with anti-rust paint if it is rusted due to oil and paint detachment.

       【Yangzhou Shengfeng Power Equipment Factory】Factory direct diesel generator set, three guarantees, the goods to pay the full paragraph, buy more details can be found at http:// or call the unit purchase hotline 0514-86282111 15366900111 Manager Liu

Next:How to save the diesel engine oil consumption?
Prev: Where is the diesel generator installed?

Pet Preform Moulds

Pet Preform Moulds,Pet Preform,Preform Mould,Moulding Machine

Injection Moulds Co., Ltd. , http://www.borgmold.com