Sprinkler tank structure : The tank body is elliptic cylindrical and made of steel plate. The tank body of the vehicle body is 2- to 3- chamber. There is a through hole at the bottom of the intermediate baffle, and the baffle in the tank has anti-wave function. To reduce the impact of liquid in the tank when the car is running. Appearance painted anti-rust paint and decorative paint.
2 tank mouth
Canister port assembly: the large lid secured with bolts to tank neck plate by a hinge pin and a small shield cover are connected together, on the small lid handle clockwise allows small cover pressing. After reversing, when the ear plate is released, the small cover can be opened. The large cover has a hole of Φ30 so that the pressure in the tank is basically the same as the atmospheric pressure during the water adding process.
3 , power take-off box
Sprinkler currently used east liberation series PTO box, pneumatically operated, an operation switch pulled back into the power take-off gear engagement position, operated by the pump drive shaft, the switch forwards the return, the pump will stop working.
4 ã€Water Pump
Self-priming or arc gear type sprinkler pumps. The structure principle, use and maintenance of the pump are detailed in the manual of the sprinkler pump and the instruction manual of the arc gear pump.
The sprinkler uses two two-way ball valves and a four-position three-way ball valve. A ball valve, gaskets, adjustment base, stem, handle, etc., the pulling handle is rotated 45 °, rotation of the core under the action of the stem, the liquid can flow when aligned with the through orifice when the handle returns to the original When it is a bit, it cuts off the flow of liquid .
Want to learn more sprinkler information please login or
GH Series High Head Sand Suction Pumps are cantilevered centrifugal single casing pumps connected with cassette, they are characterized by excellent abrasion resistance, corrosion resistance, high reliability, reasonable structure, reliable operation and long service life etc. This series of pumps are suitable for continuously delivery of mediums with strong abrasion the particle of which is too large for common Slurry Pump to transfer. They are mainly applied to dredger, river training, mining and delivery of metal smelting slag etc. and it is particularly suitable for shield system.
Product Feature
1.Single casing structure connected with cassette, wide passage, hard alloy liner with excellent wear resistance, corrosion resistance , good reliability and good cavitation performance.
2.The bearing assembly is cylinder type structure, the bearing could be lubricated by grease or oil to fit different site condition.
3.The clearance between the impeller and the cover plate could be adjusted to ensure the pump to operate at high efficiency point.
4.Packing seal, expeller seal and cartridge mechanical seal could be selected as shaft seal to fit different site condition.
5.The discharge direction could be positioned at any angle to fit different site installation condition .
GH Series High Head Sand Suction Pumps
GH Series High Head Sand Suction Pumps,Sand Suction Pump,Sand Suction Dredge Pump,High Head Shield Machine Pump,GH Series High Head Sand Suction Pump
Shijiazhuang Soarho Machinary Co.,Ltd , http://www.xhslurrypump.com